14 open source boards using the MCP2542FDxMF
Real designs built with the MCP2542FDxMF, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MasterBoard A
Gregification
60 × 100 mm163 parts2LMIT5Sensor to-CAN
Sarbf1
46 × 20 mm45 parts4LCustom license1STM32
PUTM EV PDMv2 2024
PUT-Motorsport
58 × 87.3 mm152 parts4LNo license0ESP32
Flight Computer V1
colin-skinner
77.5 × 66 mm92 parts2LNo license0PIC
Power
mbouyer
125 × 120 mm70 parts2LBSD-2-Clause0Microchip SAM
Microchip-ATSAME54-Development-Board
Albinjm72
44.7 × 76.6 mm44 parts2LCERN-OHL-S-2.00STM32
FH2 Flight Computer
EPFLRocketTeam
80 × 80 mm245 parts4LNo license0ESP32
(OLD) Flight Computer V1
colin-skinner
57.4 × 68.3 mm92 parts2LNo license0PIC
Vetus
mbouyer
75 × 80 mm43 parts2LBSD-2-Clause0VoltageTap Bee
Gregification
50 × 110.1 mm151 parts2LMIT5ESP32
Test Rocket Board
colin-skinner
68 × 66 mm79 parts2LNo license0VoltageTap A
Gregification
50 × 105 mm141 parts2LMIT5EVAL MSPM0lG3507 BQ76952
Gregification
78.7 × 81.8 mm102 parts2LMIT5CAN Eth Bridge
Gregification
22.6 × 60.7 mm57 parts2LMIT5
How designs wire the MCP2542FDxMF
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the MCP2542FDxMF connects to, and the resistors, capacitors and other passives placed on it.
- The STBY pin is tied to GND on 7 of 7 designs.
- The VDD pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF.
- The VIO pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 22 µF).
- The CANL pin has a series resistor on 5 of 7 designs, most often 120 Ω (then 330 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VSSpin 2, 9 | Connected to: GND 100% | — |
| VDDpin 3 | Connected to: 5V 86% |
|
| VIOpin 5 | Connected to: 3.3V 100% |
|
| CANLpin 6 | Connected to: A connector 86% |
|
| CANHpin 7 | Connected to: A connector 86% |
|
| STBYpin 8 | Connected to: GND 100% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CAN Eth Bridge by Gregification, Sensor to-CAN by Sarbf1, Microchip-ATSAME54-Development-Board by Albinjm72 and Flight Computer V1 by colin-skinner.
The MCP2542FDxMF in open source designs
The gallery holds 14 open source boards using the MCP2542FDxMF from 7 GitHub repositories; a typical one measures about 59 × 80 mm and carries around 92 components.
79% are two-layer designs, the rest use four layers or more, and 57% carry an open source license.
The most starred is MasterBoard A by Gregification.
Microcontrollers on boards using the MCP2542FDxMF
What boards using the MCP2542FDxMF are built for
MCP2542FDxMF: common questions
Where can I find a MCP2542FDxMF reference design?
Each of the 14 boards on this page is a real design using the MCP2542FDxMF. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MCP2542FDxMF STBY pin connected?
The STBY pin is tied to GND on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the MCP2542FDxMF.
What decoupling capacitors do designs use on the MCP2542FDxMF VDD pin?
The VDD pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the MCP2542FDxMF.
What decoupling capacitors do designs use on the MCP2542FDxMF VIO pin?
The VIO pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 7 open source designs using the MCP2542FDxMF.
Which microcontrollers do boards using the MCP2542FDxMF use?
Most are built on ESP32 (3), PIC (2), STM32 (2) and Microchip SAM (1).
How big is a typical board using the MCP2542FDxMF?
The median is 59 × 80 mm, and 79% are two-layer designs.
What is the most popular open source board using the MCP2542FDxMF?
By GitHub stars, MasterBoard A by Gregification, with 5 stars.
Can I simulate one of these boards using the MCP2542FDxMF before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.