LED-Cube
gumulka·LED-Cube
About the LED-Cube PCB
LED-Cube is an open source ESP32 PCB design by gumulka, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board, with 325 components from 44 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the SRV05-4, AMS1117-3.3, 74HC596, LAN8720A and CD4051B. By type, the board carries 129 resistors, 84 connectors, 43 capacitors, 38 transistors, 16 ICs and 5 test points.
From the project
A Controller board for an 8x8x8 LED Cube.
A Controller board for an 8x8x8 LED Cube.
This is at the moment just an idea and not validated yet. It might work, it might not.
CI will try to build some data, but I have not finished scraping the BOM.
- Schematics PDF - Incomplete STEP file - Gerber Files
Main components on the LED-Cube
LED-Cube bill of materials (BOM)
325 components, 44 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SRV05-4 | SOT-23-6 | U101 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U102 |
| 8 | 74HC596 | SOIC-16_3.9x9.9mm_P1.27mm | U201, U301, U401, U501, U601, U701, U801, U901 |
| 2 | LAN8720A | VQFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_ThermalVias | U202, U1102 |
| 1 | CD4051B | SOIC-16_3.9x9.9mm_P1.27mm | U1001 |
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | U1101 |
| 2 | CP2102N-Axx-xQFN28 | QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U1103, U1201 |
| 4 | S8050 | SOT-23 | Q2, Q3, Q1201, Q1202 |
| 18 | 2N7002 | SOT-23 | Q101, Q102, Q105, Q106, Q109, Q110, Q113, Q114 +10 |
| 16 | AO3401A | SOT-23 | Q103, Q104, Q107, Q108, Q111, Q112, Q115, Q116 +8 |
| 2 | 25Mhz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y201, Y1101 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J101 |
| 16 | LAYER | SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm | J103, J104, J105, J106, J107, J108, J109, J110 +8 |
| 64 | LED | SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm | J201, J202, J203, J204, J205, J206, J207, J208 +56 |
| 1 | Wuerth_74990111211 | WE74990111211 | J1101 |
| 2 | ESP-Prog Header | PinHeader_2x03_P1.27mm_Vertical_SMD | J1102, J1201 |
| 5 | TestPoint | TestPoint_Pad_D1.5mm | TP101, TP102, TP103, TP104, TP105 |
| 2 | TX | LED_0603_1608Metric | D1, D1201 |
| 2 | RX | LED_0603_1608Metric | D2, D1202 |
| 1 | LED | LED_0603_1608Metric | D1101 |
Show 24 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FerriteBead | L_0805_2012Metric | FB101 |
| 2 | 500mA-600R | L_0805_2012Metric | L201, L1101 |
| 4 | 1uF | C_0603_1608Metric | C3, C206, C1107, C1201 |
| 4 | 0.1uF | C_0603_1608Metric | C4, C5, C1202, C1203 |
| 2 | 4,7uF | C_0603_1608Metric | C6, C1204 |
| 3 | 22u | C_0805_2012Metric | C101, C102, C103 |
| 9 | 100n | C_0402_1005Metric | C201, C301, C401, C501, C601, C701, C801, C901 +1 |
| 2 | 10pF | C_0603_1608Metric | C202, C1102 |
| 4 | 4.7uF | C_0603_1608Metric | C203, C210, C1103, C1109 |
| 4 | 12pF | C_0402_1005Metric | C204, C205, C1104, C1105 |
| 2 | 470pF | C_0603_1608Metric | C208, C1108 |
| 2 | 10pF | C_0402_1005Metric | C209, C1106 |
| 6 | 100nF | C_0402_1005Metric | C211, C212, C213, C1110, C1111, C1112 |
| 1 | 1nF | C_0603_1608Metric | C1101 |
| 6 | 1,8k | R_0603_1608Metric | R4, R5, R9, R1206, R1207, R1209 |
| 6 | 12k | R_0603_1608Metric | R6, R7, R1101, R1109, R1202, R1203 |
| 2 | 5.1k | R_0402_1005Metric | R101, R102 |
| 22 | 10k | R_0402_1005Metric | R103, R105, R106, R107, R108, R216, R1001, R1002 +14 |
| 17 | 0R | R_0603_1608Metric | R104, R209, R210, R309, R310, R409, R410, R509 +9 |
| 64 | 100R | R_0402_1005Metric | R201, R202, R203, R204, R205, R206, R207, R208 +56 |
| 7 | 49.9R | R_0402_1005Metric | R211, R212, R213, R1110, R1111, R1112, R1113 |
| 3 | 270 | R_0603_1608Metric | R214, R1114, R1115 |
| 1 | 22k | R_0603_1608Metric | R1204 |
| 1 | 47k | R_0603_1608Metric | R1205 |
LED-Cube design files
The KiCad project lives in the gumulka/LED-Cube repository on GitHub; these links point at the commit this page was built from.
- LayoutLED-Cube.kicad_pcb
- SchematicLED-Cube.kicad_sch
LED-Cube: common questions
What microcontroller does the LED-Cube use?
The LED-Cube is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the LED-Cube PCB?
The LED-Cube has 2 copper layers and is 1.6 mm thick.
How many components are on the LED-Cube?
325 components, from 44 distinct parts. The full bill of materials is listed on this page.
Where can I download the LED-Cube design files?
From the gumulka/LED-Cube repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the LED-Cube design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which gumulka chose for the repository.
Can I test firmware for the LED-Cube without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k