HardLabs

ESP32-GATEWAY Rev F

guydmi·mocap_project·OLIMEX_gateway/ESP32-GATEWAY-master-Espressif-IDF/ESP32-GATEWAY-master/HARDWARE/Hardware revision F/ESP32-GATEWAY_Rev_F.kicad_pcb

ESP32-GATEWAY Rev F PCB layout, top view — open source ESP32 board by guydmi

About the ESP32-GATEWAY Rev F PCB

ESP32-GATEWAY Rev F is an open source ESP32 PCB design by guydmi, published on GitHub. It is a 2-layer board measuring 50.8 × 62.2 mm, with 89 components from 46 distinct parts.

Its main chip is the ESP32-WROOM-32D-4MB, from the ESP32 family. Other key parts include the SY8089AAAC(SOT23-5), LAN8710A-EZC(QFN32) and CH340T(SSOP20W). By type, the board carries 36 resistors, 21 capacitors, 5 diodes, 4 ICs, 4 inductors and 3 transistors.

It belongs with the iot & wireless designs in this gallery.

From the project

Notice that we use the latest nightly KiCad builds.

Notice that we use the latest nightly KiCad builds.

1. R54 removed. R24 and R16 moved further away from the button. 2. Improved EN signal - added C5(1uF/0603) on pin #3 of ESP32. R24 now 10k.

1. GPIO6-11, which are used by the ESP32's internal flash, were disconnected from CON1 and the 6 SD card signals are now routed instead for use when SD card is not present; 2. SD card changed from 4-bit mode of operation to 1-bit mode of operation! Added 3 NA resistor pads (R9-R11) for backwards compatiblity. 3. A lot of deep sleep mode improvements to lower the consumption to 100uA or less:

Main components on the ESP32-GATEWAY Rev F

SY8089AAAC(SOT23-5)ESP32-WROOM-32D-4MBLAN8710A-EZC(QFN32)CH340T(SSOP20W)

ESP32-GATEWAY Rev F bill of materials (BOM)

89 components, 46 distinct parts.

QtyPartRefs
1
SY8089AAAC(SOT23-5)
U2
1
ESP32-WROOM-32D-4MB
U3
1
LAN8710A-EZC(QFN32)
U4
1
CH340T(SSOP20W)
U5
1
Q12MHz/20pF/30ppm/2P/HC-49SM(SMD)
Q3
2
BC817-40(SOT23)
Q4, Q5
1
NA(NH1x20)
CON1
2
T1107A(6x3,8x2,5MM)
BUT1, RST1
2
WPM2015-3/TR
FET1, FET2
1
Closed
LED_E1
2
Mounting_hole_Shield_3.3mm
MH1, MH2
1
TFC-WXCP11-08-LF
MICRO_SD1
1
Opened
PHY_RST1
2
RA1206_(4X0603)_4B8_2.2k
RM2, RM3
1
DTC114YKA
T1
1
MISB-SWMM-5B-LF(USB_MICRO)
USB-UART1
1
LED/GREEN/0603
LED1
1
LED/RED/0603
PWRLED1
2
1N5819S4/SOD123
D1, D3
1
SMBJ6.0A(DO-214AA)
D2
Show 26 more
QtyPartRefs
1
BAT54C(SOT23-3)
D4
1
1N5822/SS34/SMA
D6
1
NA(FB0805/600R/2A)
L1
1
2.2uH/1.5A/DCR=72mR/20%/3.00x3.00x1.50mm/CD32(NR3015T2R2M)
L2
2
FB0805/600R/2A
L3, L4
4
47uF/6.3V/20%/X5R/C0805
C1, C3, C4, C10
5
22uF/6.3V/20%/X5R/C0603
C2, C8, C9, C12, C23
6
100nF/50V/20%/Y5V/C0603
C11, C13, C14, C15, C17, C24
1
2.2uF/6.3V/10%/X5R/C0603
C16
1
NA(10uF/6.3V/20%/X5R/C0603)
C18
1
1nF/2000V/10%/X7R/C1206
C19
1
NA(1nF/2000V/10%/X7R/C1206)
C20
2
27pF/50V/5%/C0G/C0603
C21, C22
6
2.2k/R0603
R1, R2, R3, R4, R7, R8
3
1k/R0603
R5, R41, R42
6
10k/R0603
R6, R29, R35, R38, R40, R45
5
NA/R0603
R9, R10, R11, R46, R54
3
220R/R0603
R14, R16, R37
1
220k/R0603
R19
1
49.9k/1%/R0603
R20
2
1M/R0603
R24, R30
1
0R(Board_Mounted)
R25
2
330R/R0603
R26, R27
4
49.9R/1%/R0603
R28, R31, R32, R33
1
12.1k/1%/R0603
R39
1
10R/R0603
R43

ESP32-GATEWAY Rev F design files

The KiCad project lives in the guydmi/mocap_project repository on GitHub; these links point at the commit this page was built from.

ESP32-GATEWAY Rev F: common questions

What microcontroller does the ESP32-GATEWAY Rev F use?

The ESP32-GATEWAY Rev F is built around the ESP32-WROOM-32D-4MB, from the ESP32 family.

How big is the ESP32-GATEWAY Rev F PCB?

The ESP32-GATEWAY Rev F measures 50.8 × 62.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ESP32-GATEWAY Rev F?

89 components, from 46 distinct parts. The full bill of materials is listed on this page.

Where can I download the ESP32-GATEWAY Rev F design files?

From the guydmi/mocap_project repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the ESP32-GATEWAY Rev F design in my own project?

The repository has no license, so all rights stay with guydmi. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ESP32-GATEWAY Rev F without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in mocap_project

Similar boards