HardLabs

STM32 gps tracker

hammadurrehman2006·kicad_lab·10_STM32_gps_tracker/STM32_gps_tracker.kicad_pcb

STM32 gps tracker PCB layout, top view — open source STM32 board by hammadurrehman2006

About the STM32 gps tracker PCB

STM32 gps tracker is an open source STM32 PCB design by hammadurrehman2006, published on GitHub. It is a 4-layer board measuring 46 × 60.3 mm, with 53 components from 35 distinct parts.

Its main chip is the STM32F030C8Tx, from the STM32 family. Other key parts include the SIM808, TPS5430DDA and SMF05CT1G. By type, the board carries 19 capacitors, 13 resistors, 5 diodes, 4 ICs, 4 connectors and 2 switches.

It belongs with the rf & radio designs in this gallery.

From the project

A collection of KiCad PCB designs developed during my Electronic Engineering degree (2024-28). Includes university projects, personal experiments, and custom components—featuring schematics, layouts, Gerber files, and documentation. Open-source hardware for education, collaboration, and real-world manufacturing.

Main components on the STM32 gps tracker

SIM808TPS5430DDASMF05CT1GSTM32F030C8Tx

STM32 gps tracker bill of materials (BOM)

53 components, 35 distinct parts.

QtyPartRefs
1
SIM808
U1
1
TPS5430DDA
U2
1
SMF05CT1G
U3
1
STM32F030C8Tx
U4
1
AO3407A
Q1
1
8MHz
Y1
1
Screw_Terminal_01x02
J1
1
LEFT HEADER PINS
J2
1
693010020611
J3
1
RIGHT HEADER PINS
J4
1
Fuse 2.5A
F1
2
U.FL-R-SMT-1
GPS1, GSM1
2
SW_Push
SW1, SW2
1
D_Zener
D1
1
B340
D2
3
LED
D3, D4, D5
1
15uH
L1
1
100u
C1
1
33p
C2
2
10p
C3, C11
Show 15 more
QtyPartRefs
1
10u
C4
2
4u7
C5, C15
1
22p
C6
1
10n
C7
1
1u
C8
1
220u
C9
2
30p
C10, C13
6
100n
C12, C14, C16, C17, C18, C19
1
4K7
R1
4
10k
R2, R3, R4, R10
1
8K2
R5
4
1k5
R6, R8, R12, R13
1
2K7
R7
1
100K
R9
1
1K
R11

STM32 gps tracker design files

The KiCad project lives in the hammadurrehman2006/kicad_lab repository on GitHub; these links point at the commit this page was built from.

STM32 gps tracker: common questions

What microcontroller does the STM32 gps tracker use?

The STM32 gps tracker is built around the STM32F030C8Tx, from the STM32 family.

How big is the STM32 gps tracker PCB?

The STM32 gps tracker measures 46 × 60.3 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the STM32 gps tracker?

53 components, from 35 distinct parts. The full bill of materials is listed on this page.

Where can I download the STM32 gps tracker design files?

From the hammadurrehman2006/kicad_lab repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the STM32 gps tracker design in my own project?

The repository has no license, so all rights stay with hammadurrehman2006. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM32 gps tracker without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in kicad_lab

Similar boards