Flight-Data-Logger
harikrishnanm5·Flight-Data-Logger-PCB
About the Flight-Data-Logger PCB
Flight-Data-Logger is an open source ESP32 PCB design by harikrishnanm5, published on GitHub. It is a 4-layer board measuring 50 × 50 mm, with 97 components from 50 distinct parts.
Its main chip is the ESP32-WROOM-32E-N4, from the ESP32 family. Other key parts include the STM32F446RET6, MPU-6050, BMP280, CY15B102QN-50SXIT and TPS62822DLCR. By type, the board carries 36 resistors, 32 capacitors, 11 ICs, 4 transistors, 4 connectors and 4 diodes.
It belongs with the iot & wireless, power & battery and sensors designs in this gallery.
From the project
A compact 50.0 × 50.0 mm, 4-layer crash-safe UAV flight data logger ("black box") hardware design built on the standard 30.5 × 30.5 mm M3 flight-controller stack footprint.
A compact 50.0 × 50.0 mm, 4-layer crash-safe UAV flight data logger ("black box") hardware design built on the standard 30.5 × 30.5 mm M3 flight-controller stack footprint.
Designed around an STM32F446RET6 Cortex-M4F MCU, ESP32-WROOM-32E Wi-Fi/BLE telemetry module, 6-axis IMU + barometer, dual SPI FRAM + MicroSD storage, an ideal-diode PowerPath + 1.0 F supercapacitor backup stage, hardware 3.00 V power-fail detection, and a high-intensity optical recovery beacon.
Main components on the Flight-Data-Logger
Flight-Data-Logger bill of materials (BOM)
97 components, 50 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F446RET6 | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | ESP32-WROOM-32E-N4 ESP32-WROOM-32 | ESP32-WROOM-32 | U2 |
| 1 | MPU-6050 | InvenSense_QFN-24_4x4mm_P0.5mm | U3 |
| 1 | BMP280 | Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering | U4 |
| 1 | CY15B102QN-50SXIT | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | TPS62822DLCR TPS62822DLC | Texas_VSON-HR-8_1.5x2mm_P0.5mm | U6 |
| 2 | LTC4412ES6#TRPBF LTC4412ES6 | TSOT-23-6 | U7, U8 |
| 1 | TLV7031DBVR TLV7031DBV | SOT-23-5 | U9 |
| 1 | LM4040AIM3-2.5 LM4040DBZ-2.5 | SOT-23 | U10 |
| 1 | AP22814AW5-7 AP22814AW5 | SOT-23-5 | U11 |
| 3 | AO3401A | SOT-23 | Q1, Q2, Q3 |
| 1 | 2N7002LT1G 2N7002 | SOT-23 | Q4 |
| 1 | ABM8-8.000MHZ-B2-T 8MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | ABS07-32.768KHZ-T 32.768kHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | B2B-PH-K-S JST_PH_BATT | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |
| 1 | HDR-1x5-2.54 SWD_5P | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | DM3D-SF MicroSD_SPI | microSD_HC_Hirose_DM3D-SF | J3 |
| 1 | HDR-1x6-1.27 ESP_UART_6P | PinHeader_1x06_P1.27mm_Vertical | J4 |
| 1 | DX-5R5V105U 1.0F_5.5V | DX_5R5VxxxxU_D11.5mm_P5.00mm | C_SC1 |
| 1 | KXT311LHS RESET | SW_SPST_CK_KXT3 | SW1 |
Show 30 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SM2835-RED-HI BEACON_LED_HI | LED_PLCC_2835 | D1 |
| 1 | LTST-C190KGKT STAT_GREEN | LED_0603_1608Metric | D2 |
| 1 | LTST-C190TBKT PWR_BLUE | LED_0603_1608Metric | D3 |
| 1 | B5819W-7-F B5819W | D_SOD-123 | D4 |
| 1 | BLM18AG601SN1D 600R@100MHz | L_0603_1608Metric | FB1 |
| 1 | 74438334010 1.0uH_3.5A | L_Wuerth_MAPI-3015 | L1 |
| 17 | CC0603KRX7R7BB104 100nF | C_0603_1608Metric | C1, C2, C8, C9, C10, C11, C14, C15 +9 |
| 2 | CC0603JRNPO9BN180 18pF | C_0603_1608Metric | C3, C4 |
| 2 | CC0603JRNPO9BN120 12pF | C_0603_1608Metric | C5, C6 |
| 1 | CL10A225KQ8NNNC 2.2uF | C_0603_1608Metric | C7 |
| 1 | CL10A475KQ8NNNC 4.7uF | C_0603_1608Metric | C12 |
| 2 | CL10A105KB8NNNC 1uF | C_0603_1608Metric | C13, C26 |
| 1 | CC0603KRX7R9BB222 2.2nF | C_0603_1608Metric | C18 |
| 2 | CL21A106KAYNNNE 10uF | C_0805_2012Metric | C21, C27 |
| 3 | CL21A226MAYNNNE 22uF | C_0805_2012Metric | C23, C28, C29 |
| 1 | CC0603JRNPO9BN220 22pF | C_0603_1608Metric | C30 |
| 1 | ERA-3AEB103V 10k_0.1% | R_0603_1608Metric | R1 |
| 1 | ERA-3AEB202V 2k_0.1% | R_0603_1608Metric | R2 |
| 2 | RC0603FR-074K7L 4.7k | R_0603_1608Metric | R3, R4 |
| 16 | RC0603FR-0710KL 10k | R_0603_1608Metric | R5, R6, R7, R8, R9, R10, R11, R12 +8 |
| 3 | RC0603FR-07100RL 100R | R_0603_1608Metric | R16, R17, R19 |
| 1 | ERJ-6GEYJ220V 22R | R_0805_2012Metric | R18 |
| 2 | RC0603FR-071KL 1k | R_0603_1608Metric | R21, R22 |
| 1 | ERJ-6GEYJ150V 15R | R_0805_2012Metric | R24 |
| 1 | RC0603FR-0745K3L 45.3k_1% | R_0603_1608Metric | R27 |
| 4 | RC0603FR-0710KL 10.0k_1% | R_0603_1608Metric | R28, R31, R32, R34 |
| 1 | RC0603FR-07100KL 100k | R_0603_1608Metric | R29 |
| 1 | RC0603FR-071K5L 1.5k | R_0603_1608Metric | R30 |
| 1 | RC0603FR-0714KL 14.0k_1% | R_0603_1608Metric | R33 |
| 1 | RC0603FR-07470KL 470k | R_0603_1608Metric | R35 |
Flight-Data-Logger design files
The KiCad project lives in the harikrishnanm5/Flight-Data-Logger-PCB repository on GitHub; these links point at the commit this page was built from.
- LayoutFlightDataLogger.kicad_pcb
- SchematicFlightDataLogger.kicad_sch
- BOMBOM.csv
Flight-Data-Logger: common questions
What microcontroller does the Flight-Data-Logger use?
The Flight-Data-Logger is built around the ESP32-WROOM-32E-N4, from the ESP32 family.
How big is the Flight-Data-Logger PCB?
The Flight-Data-Logger measures 50 × 50 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Flight-Data-Logger?
97 components, from 50 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Flight-Data-Logger design files?
From the harikrishnanm5/Flight-Data-Logger-PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Flight-Data-Logger design in my own project?
The repository has no license, so all rights stay with harikrishnanm5. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Flight-Data-Logger without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k