Esp32-clover
HarveyBates·esp32-clover·electronics/esp32-clover/esp32-clover.kicad_pcb
About the Esp32-clover PCB
Esp32-clover is an open source ESP32 PCB design by HarveyBates, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 29.2 × 46.5 mm, with 65 components from 36 distinct parts.
Its main chip is the ESP32-WROOM-32E_(16MB), from the ESP32 family. Other key parts include the MCP73832-2-OT, CP2102N-Axx-xQFN20, NCP163ASN330T1G, TCA9534 and ADC124S101CIMM. By type, the board carries 20 resistors, 17 capacitors, 7 ICs, 6 diodes, 5 connectors and 4 jumpers.
It belongs with the dev boards & breakouts, power & battery and usb & debug tools designs in this gallery.
From the project
ESP32 Clover development board.

Main components on the Esp32-clover
Esp32-clover bill of materials (BOM)
65 components, 36 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP73832-2-OT | SOT-23-5 | U1 |
| 1 | CP2102N-Axx-xQFN20 | SiliconLabs_QFN-20-1EP_3x3mm_P0.5mm_EP1.8x1.8mm | U2 |
| 1 | NCP163ASN330T1G | SOT-23-5 | U3 |
| 1 | ESP32-WROOM-32E_(16MB) | ESP32-WROOM-32E__16MB | U4 |
| 1 | TCA9534 | TSSOP-16_4.4x5mm_P0.65mm | U5 |
| 1 | ADC124S101CIMM | ADC124S101CIMM | U6 |
| 1 | DAC5571IDBVR | SOT95P280X145-6N | U7 |
| 1 | BC847 | SOT-23 | Q1 |
| 1 | ABS07AIG-32.768KHZ-T | ABS07AIG-32.768KHZ-T | Y1 |
| 1 | USB4055-30-A | USB4055-30-A | J1 |
| 1 | BATT_CONN | S2B-PH-K-S_LF__SN | J2 |
| 1 | Conn_01x08_Male | PinHeader_1x08_P2.54mm_Vertical | J3 |
| 1 | Conn_ARM_JTAG_SWD_10 | 3221-10-0100-00 | J4 |
| 1 | Conn_01x10_Male | PinHeader_1x10_P2.54mm_Vertical | J5 |
| 4 | SJ_B | SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 1 | PKMCS0909E4000-R1 | PKMCS0909E4000-R1 | LS1 |
| 1 | RESET | MCIPTG23K-V | SW1 |
| 1 | BOOT | MCIPTG23K-V | SW2 |
| 1 | PROG_BTN | MCIPTG23K-V | SW3 |
| 2 | SP4020-01FTG LED | LED_0603_1608Metric | D1, D3 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SP4020-01FTG SP0503BAHT | SOT-143 | D2 |
| 3 | LED | LED_0603_1608Metric | D4, D5, D6 |
| 4 | 4.7uF | C_0603_1608Metric | C1, C2, C4, C7 |
| 5 | 0.1uF | C_0603_1608Metric | C3, C6, C10, C15, C17 |
| 5 | 1uF | C_0603_1608Metric | C5, C8, C9, C14, C16 |
| 1 | 22uF | C_0603_1608Metric | C11 |
| 2 | 12pF | C_0603_1608Metric | C12, C13 |
| 2 | 5.1K | R_0603_1608Metric | R1, R7 |
| 3 | 470 | R_0603_1608Metric | R2, R16, R20 |
| 1 | 2.5K | R_0603_1608Metric | R3 |
| 1 | 22.1K | R_0603_1608Metric | R4 |
| 1 | 47.5K | R_0603_1608Metric | R5 |
| 4 | 1K | R_0603_1608Metric | R6, R8, R9, R18 |
| 4 | 10K | R_0603_1608Metric | R10, R13, R17, R19 |
| 3 | 4.7K | R_0603_1608Metric | R11, R14, R15 |
| 1 | 10M | R_0603_1608Metric | R12 |
Esp32-clover design files
The KiCad project lives in the HarveyBates/esp32-clover repository on GitHub; these links point at the commit this page was built from.
Esp32-clover: common questions
What microcontroller does the Esp32-clover use?
The Esp32-clover is built around the ESP32-WROOM-32E_(16MB), from the ESP32 family.
How big is the Esp32-clover PCB?
The Esp32-clover measures 29.2 × 46.5 mm, has 4 copper layers and is 1.1412 mm thick.
How many components are on the Esp32-clover?
65 components, from 36 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp32-clover design files?
From the HarveyBates/esp32-clover repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Esp32-clover design in my own project?
Yes, under the terms of its GPL-3.0 license, which HarveyBates chose for the repository.
Can I test firmware for the Esp32-clover without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k