11 open source boards using the RT6150B-33GQW
Real designs built with the RT6150B-33GQW, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Compact-SimpleFOC-Board
maruta
35 × 35 mm61 parts4LMIT22RP2040/RP2350
Main board
AllenNeuralDynamics
80 × 50 mm183 parts4LMIT5RP2040/RP2350
Battery powered
homelith
56 × 71.5 mm59 parts4LMIT2Pico board
nwasr
24 × 51 mm46 parts2LNo license2RP2040/RP2350
Pcb custom simm-40-rp2040
shishir-dey
36.6 × 22.2 mm41 parts2LMIT2RP2040/RP2350
Harp.device.quac
AllenNeuralDynamics
90 × 100 mm276 parts4LMIT0RP2040/RP2350
Project piCo
SaltyMelonYT
381.4 × 135.4 mm219 parts2LNo license0RP2040/RP2350
Valve controller
AllenNeuralDynamics
70 × 168 mm212 parts4LNo license0RP2040/RP2350
Harp.device.cuttlefish
AllenNeuralDynamics
120 × 75 mm185 parts4LNo license0RP2040/RP2350
Harp.device.environment sensor
AllenNeuralDynamics
39.9 × 28 mm46 parts4LMIT0RP2040/RP2350
Pico 2 C
bcdevices
53.7 × 21 mm55 parts2LNo license0
How designs wire the RT6150B-33GQW
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the RT6150B-33GQW connects to, and the resistors, capacitors and other passives placed on it.
- The LX2 pin has a inductor on 11 of 11 designs, most often 2.2 µH.
- The LX1 pin has a inductor on 11 of 11 designs, most often 2.2 µH.
- The VOUT pin has a decoupling capacitor on 10 of 11 designs, most often 100 nF (then 22 µF).
- The FB pin is tied to 3.3V on 11 of 11 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VOUTpin 1 | Connected to: 3.3V 100% |
|
| LX2pin 2 | Connected to: Signal 100% |
|
| GNDpin 3, 9, 11 | Connected to: GND 100% | — |
| LX1pin 4 | Connected to: Signal 100% |
|
| VINpin 5 | Connected to: 5V 82% · a signal 18% |
|
| ENpin 6 | Connected to: Signal 55% · 3.3V 45% |
|
| PSpin 7 | Connected to: The microcontroller 27% · GND 18% |
|
| VINApin 8 | Connected to: 5V 82% · a signal 18% |
|
| FBpin 10 | Connected to: 3.3V 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Compact-SimpleFOC-Board by maruta, Main board by AllenNeuralDynamics, Battery powered by homelith and Pico board by nwasr.
The RT6150B-33GQW in open source designs
The gallery holds 11 open source boards using the RT6150B-33GQW from 11 GitHub repositories; a typical one measures about 56 × 51 mm and carries around 61 components.
64% use four copper layers or more, and 55% carry an open source license.
The most starred is Compact-SimpleFOC-Board by maruta.
Parts used alongside the RT6150B-33GQW
Microcontrollers on boards using the RT6150B-33GQW
What boards using the RT6150B-33GQW are built for
RT6150B-33GQW: common questions
Where can I find a RT6150B-33GQW reference design?
Each of the 11 boards on this page is a real design using the RT6150B-33GQW. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the RT6150B-33GQW LX2 pin connected?
The LX2 pin has a inductor on 11 of 11 designs, most often 2.2 µH. Counted from the KiCad layouts of 11 open source designs using the RT6150B-33GQW.
How is the RT6150B-33GQW LX1 pin connected?
The LX1 pin has a inductor on 11 of 11 designs, most often 2.2 µH. Counted from the KiCad layouts of 11 open source designs using the RT6150B-33GQW.
What decoupling capacitors do designs use on the RT6150B-33GQW VOUT pin?
The VOUT pin has a decoupling capacitor on 10 of 11 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 11 open source designs using the RT6150B-33GQW.
What parts are used alongside the RT6150B-33GQW?
The RP2040, W25Q16JVUXIQ, ADUM4160, TPD2EUSB30 and LMR51430 appear in the most repositories here.
Which microcontrollers do boards using the RT6150B-33GQW use?
Most are built on RP2040/RP2350 (10).
How big is a typical board using the RT6150B-33GQW?
The median is 56 × 51 mm, and 36% are two-layer designs.
What is the most popular open source board using the RT6150B-33GQW?
By GitHub stars, Compact-SimpleFOC-Board by maruta, with 22 stars.
Can I simulate one of these boards using the RT6150B-33GQW before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.