Артёмитер
About the Артёмитер PCB
Артёмитер is an open source ESP32 PCB design by icl-rocketry, published on GitHub. It is a 4-layer board measuring 54.5 × 18 mm, with 79 components from 46 distinct parts.
Its main chip is the ESP32-S3, from the ESP32 family. Other key parts include the XTSD08GLGEAG, 150044M155220, DPS368, H3LIS331DLTR and MMC5983MA. By type, the board carries 36 capacitors, 17 resistors, 11 ICs, 4 connectors, 3 inductors and 1 transistor.
From the project
Altimeter for Electronics Team
Main components on the Артёмитер
Артёмитер bill of materials (BOM)
79 components, 46 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XTSD08GLGEAG AS5F32G04SNDA-08LIN | SON127P600X800X65-8N | IC2 |
| 1 | 150044M155220 | 150044M155220 | U1 |
| 1 | ESP32-S3 | QFN40P700X700X90-57N | U2 |
| 1 | DPS368 | XDCR_DPS310 | U4 |
| 1 | H3LIS331DLTR | QFN300X300X100-16N | U5 |
| 1 | MMC5983MA | PQFN50P300X300X100-16N | U6 |
| 1 | ICM-20608-G | PQFN50P300X300X80-16N | U7 |
| 2 | XC8111 | SOT-23-5 | U8, U9 |
| 1 | MAX77827AEFD+T | CONV_MAX77827AEFD+T | U10 |
| 1 | SC4215 | SOIC127P599X175-9N | U11 |
| 1 | PMV20ENR | SOT-23 | Q1 |
| 1 | 40MHz±10ppm | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | CONN_01X04_MALE Conn_01x04_Male | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 2 | CONN_01X02_MALE Conn_01x02_Male | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2, J4 |
| 1 | USB_C_RECEPTACLE_USB2.0 USB_C_Receptacle_USB2.0 | USB_C_Receptacle_Palconn_UTC16-G | J3 |
| 1 | 3V3LED | R_0402_1005Metric | 3V3LED1 |
| 2 | CONN_01X02_MALE Conn_01x02_Male | PinHeader_1x02_P2.54mm_Vertical | BOOTJUMPER1, ENJUMPER1 |
| 1 | TX_LED | R_0402_1005Metric | TXLED1 |
| 1 | USB_LED | LED_0402_1005Metric | USBLED1 |
| 1 | SP0503BAHT | SOT-143 | D1 |
Show 26 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2.0NH 2.0nH | L_0402_1005Metric | L1 |
| 1 | 20NH 20nH | L_0402_1005Metric | L2 |
| 1 | 1UH 1uH | L_0805_2012Metric | L3 |
| 6 | 10UF 10uF | C_0402_1005Metric | C1, C17, C20, C32, C34, C40 |
| 7 | 1UF 1uF | C_0402_1005Metric | C2, C4, C7, C12, C19, C30, C39 |
| 11 | 0.1UF 0.1uF | C_0402_1005Metric | C3, C5, C6, C9, C10, C11, C23, C25 +3 |
| 2 | 10NF 10nF | C_0402_1005Metric | C8, C21 |
| 2 | C | C_0402_1005Metric | C13, C14 |
| 3 | 100NF 100nF | C_0402_1005Metric | C15, C16, C18 |
| 1 | 2.2UF 2.2uF | C_0402_1005Metric | C22 |
| 1 | 0.47UF 0.47uF | C_0402_1005Metric | C24 |
| 1 | 10UF 10uF | C_0603_1608Metric | C29 |
| 1 | 22UF 22uF | C_0603_1608Metric | C31 |
| 1 | 4.7UF 4.7uF | C_0402_1005Metric | C33 |
| 3 | 10K | R_0402_1005Metric | R1, R3, R19 |
| 2 | 470 | R_0402_1005Metric | R2, R4 |
| 1 | 309 | R_0402_1005Metric | R5 |
| 1 | 30 | R_0402_1005Metric | R6 |
| 1 | 158 | R_0402_1005Metric | R7 |
| 1 | 499 | R_0402_1005Metric | R9 |
| 1 | 1k | R_0402_1005Metric | R10 |
| 3 | 5.1K 5.1k | R_0402_1005Metric | R12, R13, R14 |
| 1 | 36K 36k | R_0402_1005Metric | R15 |
| 1 | 24K 24k | R_0402_1005Metric | R16 |
| 1 | 14K 14k | R_0402_1005Metric | R17 |
| 1 | 56K 56k | R_0402_1005Metric | R18 |
Артёмитер design files
The KiCad project lives in the icl-rocketry/Ricardo-Altimeter repository on GitHub; these links point at the commit this page was built from.
Артёмитер: common questions
What microcontroller does the Артёмитер use?
The Артёмитер is built around the ESP32-S3, from the ESP32 family.
How big is the Артёмитер PCB?
The Артёмитер measures 54.5 × 18 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the Артёмитер?
79 components, from 46 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Артёмитер design files?
From the icl-rocketry/Ricardo-Altimeter repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Артёмитер design in my own project?
The repository has no license, so all rights stay with icl-rocketry. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Артёмитер without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Ricardo-Altimeter
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k