Ricardo-Pete

icl-rocketry·Ricardo-Pete·Hardware/PETE.kicad_pcb

Ricardo-Pete PCB layout, top view — open source ESP32 board by icl-rocketry

About the Ricardo-Pete PCB

Ricardo-Pete is an open source ESP32 PCB design by icl-rocketry, published on GitHub. It is a 4-layer board measuring 61 × 37 mm, with 82 components from 45 distinct parts.

Its main chip is the ESP32-S3, from the ESP32 family. Other key parts include the SN65HVD230, LM66200DRLR, MAX77827AEFD+T, SC4215 and MPRLS0025PA00001A. By type, the board carries 37 capacitors, 18 resistors, 11 ICs, 3 connectors, 3 inductors and 2 diodes.

Main components on the Ricardo-Pete

Ricardo-Pete bill of materials (BOM)

82 components, 45 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3
U1
1
SN65HVD230
U2
1
LM66200DRLR
U3
1
MAX77827AEFD+T
U4
1
SC4215
U5
5
MPRLS0025PA00001A
U6, U7, U8, U9, U10
1
DPS310
U11
1
40MHz±10ppm
Y1
1
RBUS
J1
1
USB_C_RECEPTACLE_USB2.0
USB_C_Receptacle_USB2.0
J2
1
Micro_SD_Card_Det
J3
1
BLUE_LED
3V3LED1
1
RED_LED
12VLED1
2
CONN_01X02_MALE
Conn_01x02_Male
BOOTJUMPER1, ENJUMPER1
1
TermJP
JP1
1
GREEN_LED
TXLED1
1
WHITE_LED
USBLED1
1
SM712_SOT23
D1
1
SP0503BAHT
D2
1
2.0NH
2.0nH
L1
Show 25 more
QtyPartRefs
1
20NH
20nH
L2
1
1UH
1uH
L3
5
10UF
10uF
C1, C16, C20, C24, C26
4
1UF
1uF
C2, C4, C7, C22
7
0.1UF
0.1uF
C3, C5, C6, C8, C10, C11, C27
1
10NF
10nF
C9
1
DNP
C12
2
11PF
11pF
C13, C14
3
100NF
100nF
C15, C36, C37
1
47NF
47nF
C17
5
0.1U
0.1u
C18, C19, C28, C29, C30
1
10UF
10uF
C21
1
22UF
22uF
C23
1
4.7UF
4.7uF
C25
5
1n
C31, C32, C33, C34, C35
5
10K
10k
R1, R3, R14, R17, R18
2
470
R2, R4
1
DNP
R5
1
499
R6
1
3k
R7
1
0
R8
2
60
R9, R10
3
5.1K
5.1k
R11, R12, R13
1
14K
14k
R15
1
56K
56k
R16

Ricardo-Pete design files

The KiCad project lives in the icl-rocketry/Ricardo-Pete repository on GitHub; these links point at the commit this page was built from.

Ricardo-Pete: common questions

What microcontroller does the Ricardo-Pete use?

The Ricardo-Pete is built around the ESP32-S3, from the ESP32 family.

How big is the Ricardo-Pete PCB?

The Ricardo-Pete measures 61 × 37 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Ricardo-Pete?

82 components, from 45 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Ricardo-Pete design files?

From the icl-rocketry/Ricardo-Pete repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Ricardo-Pete design in my own project?

The repository has no license, so all rights stay with icl-rocketry. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Ricardo-Pete without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards