HardLabs

Typec state passed

IgorCulafic·PCBSmith·outputs/aerosense-2f-r001/design/.pcbsmith/routing-checkpoints/typec_state-passed.kicad_pcb

Typec state passed PCB layout, top view — open source RP2040/RP2350 board by IgorCulafic

About the Typec state passed PCB

Typec state passed is an open source RP2040/RP2350 PCB design by IgorCulafic, published on GitHub under the AGPL-3.0 license. It is a 2-layer board measuring 70 × 50 mm, with 92 components from 40 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q16JVSSIQ, AP2112K-3.3TRG1, TUSB320LAIRWBR, TPS2553DBVR and USBLC6-2SC6. By type, the board carries 34 resistors, 30 capacitors, 11 ICs, 5 switches, 4 connectors and 3 diodes.

From the project

Open-source PCB design tools: KiCad workflows, automatic routing, design review and laser fabrication. Working toward plain-language circuit-to-board design.

Generated review bundles, fabrication packages, reports, and visual previews go here.

This directory is ignored by git except for this README.

Main components on the Typec state passed

RP2040W25Q16JVSSIQAP2112K-3.3TRG1TUSB320LAIRWBRTPS2553DBVRUSBLC6-2SC6SHT45-AD1B-R3TPD1E10B06DPYRTPD2EUSB30DRTRTPD4E05U06DQAR

Typec state passed bill of materials (BOM)

92 components, 40 distinct parts.

QtyPartRefs
1
RP2040
U1
1
W25Q16JVSSIQ
U2
1
AP2112K-3.3TRG1
U3
1
TUSB320LAIRWBR
U4
2
TPS2553DBVR
U5, U6
1
USBLC6-2SC6
U7
1
SHT45-AD1B-R3
U8
1
TPD1E10B06DPYR
U9
1
TPD2EUSB30DRTR
U10
1
TPD4E05U06DQAR
U11
2
2N7002,215
Q1, Q2
1
ABM8-272-T3 12MHz
Y1
1
USB4105-GF-A
J1
1
DM3AT-SF-PEJM5
J3
2
Molex 47053-1000
J4, J5
1
B3F-1000 MODE
SW1
1
B3F-1000 SELECT_ACK
SW2
1
B3F-1000 LOG
SW3
1
B3U-1000P BOOTSEL
SW4
1
B3U-1000P RESET
SW5
Show 20 more
QtyPartRefs
1
Adafruit 4440 OLED
DS1
1
150060GS75000
D1
1
150060YS75000
D2
1
150060BS75000
D3
1
600R@100MHz
FB1
3
10uF
C1, C26, C28
2
1uF
C2, C3
17
100nF
C4, C5, C6, C7, C8, C9, C10, C11 +9
2
1uF
C12, C27
2
15pF C0G
C15, C16
2
47uF
C20, C21
2
1nF
C29, C30
2
27R
R1, R2
7
1k
R3, R17, R18, R26, R27, R28, R34
13
10k
R4, R5, R6, R7, R13, R14, R15, R16 +5
1
900k
R8
2
59k 1%
R9, R10
4
100k
R11, R12, R21, R22
2
100R
R19, R20
3
22R
R30, R31, R32

Typec state passed design files

The KiCad project lives in the IgorCulafic/PCBSmith repository on GitHub; these links point at the commit this page was built from.

Typec state passed: common questions

What microcontroller does the Typec state passed use?

The Typec state passed is built around the RP2040, from the RP2040/RP2350 family.

How big is the Typec state passed PCB?

The Typec state passed measures 70 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Typec state passed?

92 components, from 40 distinct parts. The full bill of materials is listed on this page.

Where can I download the Typec state passed design files?

From the IgorCulafic/PCBSmith repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Typec state passed design in my own project?

Yes, under the terms of its AGPL-3.0 license, which IgorCulafic chose for the repository.

Can I test firmware for the Typec state passed without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in PCBSmith

Similar boards