HardLabs

Amiga-N2630

jasonsbeer·Amiga-N2630·KiCAD/A2630-New-KiCAD-Rev410-PLCC/N2360.kicad_pcb

Amiga-N2630 PCB layout, top view — open source board by jasonsbeer
Simulate this board

About the Amiga-N2630 PCB

Amiga-N2630 is an open source PCB design by jasonsbeer, published on GitHub. It is a 4-layer board measuring 318.4 × 124.5 mm, with 231 components from 53 distinct parts.

Other key parts include the 27C256, MC68030, MC68882, 74AHCT04 and 74HCT05. By type, the board carries 99 resistors, 79 capacitors, 32 ICs, 9 connectors, 2 crystals and 1 transistor.

It belongs with the retro computing designs in this gallery.

From the project

A re-imagining of the Amiga A2630 processor card.

There are two versions of the N2630 card. One for the PLCC footprint MC68882 coprocessor and one for the PGA footprint MC68882 coprocessor. The two sub-revisions are otherwise identical.

Main components on the Amiga-N2630

27C256MC68030MC6888274AHCT0474HCT05SDRAM(4Mx16)SDRAM(16Mx16)74LVC245XC9572XL-10VQ64XC95144XL-10TQ14474HCT24474HCT17474FCT64674HCT245AP7361C-33ER

Amiga-N2630 bill of materials (BOM)

231 components, 53 distinct parts.

QtyPartRefs
2
27C256
U102, U103
1
MC68030
U200
1
MC68882
U201
1
74AHCT04
U204
1
74HCT05
U300
2
SDRAM(4Mx16)
U400, U401
4
SDRAM(16Mx16)
U406, U407, U408, U409
4
74LVC245
U418, U419, U420, U421
1
XC9572XL-10VQ64
U600
2
XC95144XL-10TQ144
U601, U602
1
74HCT244
U606
1
74HCT174
U700
2
74FCT646
U701, U702
5
74HCT245
U703, U704, U705, U706, U707
1
AP7361C-33ER
U800
3
74HCT245
U900, U901, U902
1
MMBT3906
Q900
1
25MHz
X1
1
50MHz
X2
1
ATA/IDE
CN5
Show 33 more
QtyPartRefs
1
LED
CN6
1
COMPACT FLASH ATA
CN7
1
CPLD0
CN600
1
CPLD1
CN601
1
CPLD2
CN602
1
25/FPU
J202
1
CF SEL
J901
1
CABLE SELECT
J905
1
CONFIG
CJ1
1
CONFIG
CJ2
2
0.01uF
CX1, CX2
1
MODE68K
JT1
1
SMDIS
JT2
1
_IDEACCESS
JT4
1
_MEMZ3
JT5
1
_MEMZ2
JT6
61
0.1uF
C102, C103, C200, C201, C202, C204, C206, C208 +53
1
330pF
C205
1
0.22uF
C209
4
22pF
C210, C211, C212, C213
8
10uF
C712, C714, C718, C719, C720, C802, C804, C805
2
47uF
C713, C803
2
4.7uF
C800, C801
39
1K
R100, R101, R102, R103, R104, R105, R106, R131 +31
11
68
R203, R204, R206, R207, R209, R210, R211, R212 +3
10
3.3K
R228, R229, R230, R231, R232, R233, R234, R235 +2
1
10K
R903
2
4.7K
R905, R931
23
22
R906, R907, R908, R909, R910, R911, R912, R913 +15
1
82
R924
1
150R
R930
7
1K
RN104, RN105, RN106, RN107, RN108, RN109, RN110
4
3.3K
RN400, RN401, RN402, RN403

Amiga-N2630 design files

The KiCad project lives in the jasonsbeer/Amiga-N2630 repository on GitHub; these links point at the commit this page was built from.

Amiga-N2630: common questions

How big is the Amiga-N2630 PCB?

The Amiga-N2630 measures 318.4 × 124.5 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Amiga-N2630?

231 components, from 53 distinct parts. The full bill of materials is listed on this page.

Where can I download the Amiga-N2630 design files?

From the jasonsbeer/Amiga-N2630 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Amiga-N2630 design in my own project?

The repository has no license, so all rights stay with jasonsbeer. Use it as a reference, and ask the author before reusing the design.

Similar boards