7 open source boards using the 74AHCT04
Real designs built with the 74AHCT04, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Amiga-N2630
jasonsbeer
318.4 × 124.5 mm231 parts4LNo license69AVR/Arduino
OtterX
RetroRemake
170.1 × 170.1 mm168 parts4LCERN-OHL-W-2.040Baseboard
fsaenz23
157.7 × 86.4 mm52 parts6LNo license0Hobby 8088 PC
LucaEstiva
263.8 × 181.3 mm23 parts2LNo license0AFI-K5173
Stefan311
100 × 160 mm46 parts2LBSD-2-Clause2Logicboard
fsaenz23
150 × 39 mm20 parts4LNo license0MECB IDE
epaell
99.8 × 99.8 mm16 parts2LNo license6
How designs wire the 74AHCT04
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74AHCT04 connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 4 | Connected to: Signal 83% · not connected 17% |
|
| GNDpin 7 | Connected to: GND 83% · not connected 17% | — |
| Pin 12 | Connected to: Signal 83% · not connected 17% |
|
| VCCpin 14 | Connected to: 5V 83% · not connected 17% |
|
10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Amiga-N2630 by jasonsbeer, OtterX by RetroRemake, MECB IDE by epaell and AFI-K5173 by Stefan311.
The 74AHCT04 in open source designs
The gallery holds 7 open source boards using the 74AHCT04 from 6 GitHub repositories; a typical one measures about 157.7 × 124.5 mm and carries around 46 components.
57% use four copper layers or more, and 29% carry an open source license.
The most starred is Amiga-N2630 by jasonsbeer.
Parts used alongside the 74AHCT04
Microcontrollers on boards using the 74AHCT04
What boards using the 74AHCT04 are built for
74AHCT04: common questions
Where can I find a 74AHCT04 reference design?
Each of the 7 boards on this page is a real design using the 74AHCT04. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the 74AHCT04 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the 74AHCT04?
The median is 157.7 × 124.5 mm, and 43% are two-layer designs.
What is the most popular open source board using the 74AHCT04?
By GitHub stars, Amiga-N2630 by jasonsbeer, with 69 stars.
Can I simulate one of these boards using the 74AHCT04 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.