8 open source boards using the KY-040

Real designs built with the KY-040, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the KY-040

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the KY-040 connects to, and the resistors, capacitors and other passives placed on it.

GNDpin GNDConnected to: GND 88%
VCCpin VCCConnected to: 3.3V 88%

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Wanptek encoder by igorzab-stud, Walky Talky by zmuhammad07, GummyPad by CloudsAreCloudy and Keeb Small Hotswap Encoder Wireless by DeniskaRediska21.

The KY-040 in open source designs

The gallery holds 8 open source boards using the KY-040 from 8 GitHub repositories; a typical one measures about 67.8 × 88.3 mm and carries around 35 components.

88% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Wanptek encoder by igorzab-stud.

Microcontrollers on boards using the KY-040

KY-040: common questions

Where can I find a KY-040 reference design?

Each of the 8 boards on this page is a real design using the KY-040. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the KY-040 use?

Most are built on RP2040/RP2350 (3), ESP32 (2), AVR/Arduino (1) and Raspberry Pi (1).

How big is a typical board using the KY-040?

The median is 67.8 × 88.3 mm, and 88% are two-layer designs.

What is the most popular open source board using the KY-040?

By GitHub stars, Wanptek encoder by igorzab-stud, with 3 stars.

Can I simulate one of these boards using the KY-040 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part