Roadster course

jeffreydthompson·roadster_course·circuits/kicad/RCcar.kicad_pcb

Roadster course PCB layout, top view — open source ESP32 board by jeffreydthompson

About the Roadster course PCB

Roadster course is an open source ESP32 PCB design by jeffreydthompson, published on GitHub under the CC-BY-4.0 license. It is a 4-layer board measuring 60 × 40 mm, with 79 components from 38 distinct parts.

Its main chip is the ESP32-S3-MINI-1-N8, from the ESP32 family. Other key parts include the TPS2116DRLR, FRM121WFR050TM, TPS63001DRCR, CP2102N-A02-GQFN28R and MAX17048G+T10. By type, the board carries 34 resistors, 25 capacitors, 10 ICs, 7 transistors, 1 switch and 1 diode.

It belongs with the iot & wireless and robotics & motion designs in this gallery.

From the project

Support files for course creating BLE remote controlled car from scratch.

An open source remote control car — mechanical designs, circuit schematics, firmware, and software all in one place.

The Open Roadster is a fully open source RC car project covering every layer of the build:

- Mechanical — 3D-printable chassis and drivetrain in FreeCAD, body designed in Blender - Circuit — custom 4-layer controller PCB designed in EasyEDA - Firmware — ESP32-S3 motor, steering, and battery monitoring over Bluetooth LE - Software — iOS remote control app (BLE)

Main components on the Roadster course

Roadster course bill of materials (BOM)

79 components, 38 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-MINI-1-N8
ESPRESSIF(乐鑫)
U1
1
TPS2116DRLR
TI(德州仪器)
U3
2
FRM121WFR050TM
50mΩ
FOJAN(富捷)
U4, U11
1
TPS63001DRCR
TI(德州仪器)
U5
1
CP2102N-A02-GQFN28R
SILICON LABS(芯科)
U6
1
MAX17048G+T10
ADI(亚德诺)/MAXIM(美信)
U7
2
DRV8833RTYR
TI(德州仪器)
U8, U10
1
MCP73831T-2ACI/OT
Microchip Tech
U9
1
SI2305CDS
TECH PUBLIC(台舟)
Q1
4
2SC2712-GR,LF(T
TOSHIBA
Q3, Q4, Q7, Q8
2
SS8050-G
CJ(江苏长电/长晶)
Q10, Q11
1
MS-12D08G3.5
HOOYA(皓宇电子)
SW2
1
SP0503BAHTG
Littelfuse
D3
1
2.2UH
2.2uH
Sunlord(顺络)
L1
1
4.7UF
4.7uF
SAMSUNG(三星)
C1
1
22UF
22uF
SAMSUNG(三星)
C2
2
4.7UF
4.7uF
SAMSUNG(三星)
C3, C4
3
22UF
22uF
Chinocera(华瓷)
C5, C25, C34
5
100NF
100nF
SAMSUNG
C6, C18, C20, C22, C23
3
10UF
10uF
SAMSUNG(三星)
C7, C8, C9
Show 18 more
QtyPartRefs
1
100NF
100nF
SAMSUNG(三星)
C10
5
100NF
100nF
SAMSUNG(三星)
C11, C27, C29, C30, C32
2
2.2UF
2.2uF
SAMSUNG(三星)
C26, C33
2
10NF
10nF
YAGEO(国巨)
C28, C31
4
0402WGF5101TCE
5.1kΩ
UNI-ROYAL(厚声)
R1, R5, R6, R9
9
0402WGF1002TCE
10kΩ
UniOhm
R2, R3, R8, R14, R16, R19, R37, R38 +1
1
0402WGF1000TCE
100Ω
UNI-ROYAL(厚声)
R4
3
0603WAF4700T5E
470Ω
UNI-ROYAL(厚声)
R7, R10, R11
2
0402WGF4701TCE
4.7kΩ
UNI-ROYAL(厚声)
R12, R13
4
RC0402FR-07100RL
100Ω
YAGEO(国巨)
R15, R17, R18, R20
2
0603WAF220JT5E
22Ω
UNI-ROYAL(厚声)
R21, R23
2
MCT06030C1001FP500
1kΩ
Vishay Intertech
R22, R24
1
0603WAF1003T5E
100kΩ
UNI-ROYAL(厚声)
R25
1
0402WGF1001TCE
1kΩ
UniOhm
R31
1
0402WGF4752TCE
47.5kΩ
UniOhm
R32
1
0402WGF2212TCE
22.1kΩ
UniOhm
R33
1
0402WGF220JTCE
22Ω
UniOhm
R35
2
0402WGF0000TCE
0Ω
UniOhm
R39, R40

Roadster course design files

The KiCad project lives in the jeffreydthompson/roadster_course repository on GitHub; these links point at the commit this page was built from.

Roadster course: common questions

What microcontroller does the Roadster course use?

The Roadster course is built around the ESP32-S3-MINI-1-N8, from the ESP32 family.

How big is the Roadster course PCB?

The Roadster course measures 60 × 40 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Roadster course?

79 components, from 38 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Roadster course design files?

From the jeffreydthompson/roadster_course repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Roadster course design in my own project?

Yes, under the terms of its CC-BY-4.0 license, which jeffreydthompson chose for the repository.

Can I test firmware for the Roadster course without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards