5 open source boards using the NRF52832-QFAA-R
Real designs built with the NRF52832-QFAA-R, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRF
Neurband c
jlcjak
28.7 × 27 mm61 parts4LNo license32Nordic nRF
Ble sensor
MrMarble
50 × 30 mm22 parts2LNo license1Nordic nRF
EEG32
Iwetter
68.3 × 55.7 mm215 parts4LNo license0Nordic nRF
GPS-Tracker
zzertexx
65 × 38.5 mm71 parts4LNo license0Nordic nRF
NRF52832
jmos1
29.2 × 65.3 mm43 parts4LNo license0
How designs wire the NRF52832-QFAA-R
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the NRF52832-QFAA-R connects to, and the resistors, capacitors and other passives placed on it.
- The DEC1_1 pin has a capacitor to GND on 5 of 5 designs, most often 100 nF.
- The VDD_13 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
- The DEC3_33 pin has a capacitor to GND on 5 of 5 designs, most often 100 pF (then 100 nF).
- The XC1_34 pin has a capacitor to GND on 5 of 5 designs, most often 12 pF (then 12 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| DEC1_1pin 1 | Connected to: Signal 100% |
|
| P0.00/XL1_2pin 2 | Connected to: Signal 80% · not connected 20% |
|
| P0.01/XL2_3pin 3 | Connected to: Signal 80% · not connected 20% |
|
| P0.03/AIN1_5pin 5 | Connected to: Not connected 60% · a signal 40% | — |
| P0.06_8pin 8 | Connected to: Signal 100% |
|
| NFC1/P0.09_11pin 11 | Connected to: Not connected 60% · a signal 40% | — |
| NFC2/P0.10_12pin 12 | Connected to: Not connected 80% · a signal 20% | — |
| VDD_13pin 13 | Connected to: 3.3V 100% |
|
| P0.14_17pin 17 | Connected to: Not connected 60% · a signal 40% | — |
| P0.15_18pin 18 | Connected to: Not connected 60% · a signal 40% | — |
| P0.16_19pin 19 | Connected to: Not connected 60% · a signal 40% | — |
| P0.18/SWO_21pin 21 | Connected to: Not connected 60% · a signal 40% | — |
| P0.19_22pin 22 | Connected to: Not connected 80% · a signal 20% | — |
| P0.20_23pin 23 | Connected to: Not connected 80% · a signal 20% | — |
| ANT_30pin 30 | Connected to: Signal 100% |
|
| VSS_31pin 31 | Connected to: GND 100% | — |
| DEC2_32pin 32 | Connected to: Not connected 40% · GND 20% · a signal 40% |
|
| DEC3_33pin 33 | Connected to: Signal 100% |
|
| XC1_34pin 34 | Connected to: Signal 100% |
|
| XC2_35pin 35 | Connected to: Signal 100% |
|
| VDD_36pin 36 | Connected to: 3.3V 100% |
|
| P0.27_39pin 39 | Connected to: Not connected 80% · a signal 20% | — |
| P0.28/AIN4_40pin 40 | Connected to: Not connected 80% · a signal 20% | — |
| P0.29/AIN5_41pin 41 | Connected to: Not connected 80% · a signal 20% | — |
| P0.30/AIN6_42pin 42 | Connected to: Not connected 80% · a signal 20% | — |
| P0.31/AIN7_43pin 43 | Connected to: Not connected 60% · a signal 40% | — |
| NC_44pin 44 | Connected to: Not connected 100% | — |
| VSS_45pin 45 | Connected to: GND 100% | — |
| DEC4_46pin 46 | Connected to: Signal 100% |
|
| DCC_47pin 47 | Connected to: Signal 60% · not connected 40% |
|
| VDD_48pin 48 | Connected to: 3.3V 100% |
|
| VSS_49pin 49 | Connected to: GND 100% | — |
17 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Neurband c by jlcjak, Ble sensor by MrMarble, EEG32 by Iwetter and NRF52832 by jmos1.
The NRF52832-QFAA-R in open source designs
The gallery holds 5 open source boards using the NRF52832-QFAA-R from 5 GitHub repositories; a typical one measures about 50 × 38.5 mm and carries around 61 components.
80% use four copper layers or more, and 0% carry an open source license.
The most starred is Neurband c by jlcjak.
Microcontrollers on boards using the NRF52832-QFAA-R
What boards using the NRF52832-QFAA-R are built for
NRF52832-QFAA-R: common questions
Where can I find a NRF52832-QFAA-R reference design?
Each of the 5 boards on this page is a real design using the NRF52832-QFAA-R. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the NRF52832-QFAA-R DEC1_1 pin connected?
The DEC1_1 pin has a capacitor to GND on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the NRF52832-QFAA-R.
What decoupling capacitors do designs use on the NRF52832-QFAA-R VDD_13 pin?
The VDD_13 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the NRF52832-QFAA-R.
How is the NRF52832-QFAA-R DEC3_33 pin connected?
The DEC3_33 pin has a capacitor to GND on 5 of 5 designs, most often 100 pF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the NRF52832-QFAA-R.
Which microcontrollers do boards using the NRF52832-QFAA-R use?
Most are built on Nordic nRF (5).
How big is a typical board using the NRF52832-QFAA-R?
The median is 50 × 38.5 mm, and 20% are two-layer designs.
What is the most popular open source board using the NRF52832-QFAA-R?
By GitHub stars, Neurband c by jlcjak, with 32 stars.
Can I simulate one of these boards using the NRF52832-QFAA-R before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.