12 open source boards using the LSM6DSLTR

Real designs built with the LSM6DSLTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

How designs wire the LSM6DSLTR

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the LSM6DSLTR connects to, and the resistors, capacitors and other passives placed on it.

  • The VDDIO pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 4.7 µF).
  • The VDD pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 4.7 µF).
  • The SDX pin is tied to GND on 9 of 9 designs.
  • The SCX pin is tied to GND on 9 of 9 designs.
SDXpin 2Connected to: GND 100%
SCXpin 3Connected to: GND 100%
VDDIOpin 5Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (23), 4.7 µF (2), 1 µF (2)
GNDpin 6, 7Connected to: GND 100%
VDDpin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (19), 4.7 µF (2), 1 µF (2)
NCpin 10, 11Connected to: Not connected 100%
CSpin 12Connected to: The microcontroller 44%, a connector 22% · 3.3V 33%
  • Capacitor to GND on 44% · 100 nF (9), 4.7 µF (2), 1 µF (2)
SCLpin 13Connected to: The microcontroller 56%, APDS-9960 22%, TLV320AIC3104 22%
  • Pull-up to 3.3V on 33% · 4.7 kΩ (2), 10 kΩ (1)
SDA_14pin 14Connected to: The microcontroller 56%, APDS-9960 22%, TLV320AIC3104 22%
  • Pull-up to 3.3V on 33% · 4.7 kΩ (2), 10 kΩ (1)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ZynqPCB by juliancoy, Neurband c by jlcjak, MIDAS MK1 by ISSUIUC and PGC Super Main by HandHeldLegend.

The LSM6DSLTR in open source designs

The gallery holds 12 open source boards using the LSM6DSLTR from 9 GitHub repositories; a typical one measures about 60 × 60.3 mm and carries around 109 components.

100% use four copper layers or more, and 17% carry an open source license.

The most starred is ZynqPCB by juliancoy.

Microcontrollers on boards using the LSM6DSLTR

LSM6DSLTR: common questions

Where can I find a LSM6DSLTR reference design?

Each of the 12 boards on this page is a real design using the LSM6DSLTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the LSM6DSLTR VDDIO pin?

The VDDIO pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 9 open source designs using the LSM6DSLTR.

What decoupling capacitors do designs use on the LSM6DSLTR VDD pin?

The VDD pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 9 open source designs using the LSM6DSLTR.

How is the LSM6DSLTR SDX pin connected?

The SDX pin is tied to GND on 9 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the LSM6DSLTR.

What parts are used alongside the LSM6DSLTR?

The USBLC6-2SC6, APDS-9960, DRV8212PDSGR, LM1117MP-3.3 and S25FL256SAGNFI001 appear in the most repositories here.

Which microcontrollers do boards using the LSM6DSLTR use?

Most are built on ESP32 (4), FPGA (2), STM32 (2) and Nordic nRF (1).

How big is a typical board using the LSM6DSLTR?

The median is 60 × 60.3 mm, and 0% are two-layer designs.

What is the most popular open source board using the LSM6DSLTR?

By GitHub stars, ZynqPCB by juliancoy, with 75 stars.

Can I simulate one of these boards using the LSM6DSLTR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part