Kicad hub

JMcordobamendez·kicad-hub·examples/royalblue54l-feather/RoyalBlue54L-Feather.kicad_pcb

Kicad hub PCB layout, top view — open source Nordic nRF board by JMcordobamendez

About the Kicad hub PCB

Kicad hub is an open source Nordic nRF PCB design by JMcordobamendez, published on GitHub under the MIT license. It is a 8-layer board measuring 58.4 × 22.9 mm, with 48 components from 29 distinct parts.

Its main chip is the BM15x, from the Nordic nRF family. Other key parts include the nPM1300-QEXX, TPD3E001DRLR, W25Q16JVUXIQ, nRF52833-QDXX and TXB0106RGY. By type, the board carries 25 capacitors, 6 ICs, 6 resistors, 4 connectors, 2 crystals and 2 switches.

It belongs with the iot & wireless, dev boards & breakouts and usb & debug tools designs in this gallery.

From the project

GitHub Action for KiCad design review: ERC/DRC, BOM diff and checks, multi-supplier prices, before/after images in pull requests and a fab package for any fab house.

An ARM + RISC-V Feather board with the new nRF54L15, built-in debugger, and smart PMIC

The RoyalBlue54L--familiar Feather formfactor with distinctive features. Nordic's next-gen nRF54L15, an onboard CMSIS-DAP debugger + UART bridge, and smart power-management features from the nPM1300 enable rapid development for your next Bluetooth 6.0, Thread, Matter, Zigbee, Amazon Sidewalk, or proprietary wireless project.

Main components on the Kicad hub

Kicad hub bill of materials (BOM)

48 components, 29 distinct parts.

QtyPartRefs
1
BM15x
U1
1
nPM1300-QEXX
U2
1
TPD3E001DRLR
U3
1
W25Q16JVUXIQ
U4
1
nRF52833-QDXX
U5
1
TXB0106RGY
U6
1
32.768KHz
Y1
1
32MHz
Y2
1
USB_C_Receptacle_USB2.0_16P
J3
1
Conn_01x02_MountingPin
J4
1
Conn_01x04_MountingPin
J5
1
Conn_01x05_MountingPin
J6
2
SW_Push
SW1, SW2
1
LED_Small
D1
1
LED_ARGB
D3
1
2.2uH
L1
7
100nF
C1, C12, C16, C17, C19, C24, C25
4
10uF
C2, C3, C4, C8
2
1uF
C5, C6
4
4.7uF
C7, C9, C10, C23
Show 9 more
QtyPartRefs
1
2.2uF
C11
2
300pF
C13, C14
2
1uF
C15, C22
2
12pF
C18, C20
1
100pF
C21
2
100kR
R1, R8
1
330kR
R4
2
10kR
R5, R7
1
470R
R6

Kicad hub design files

The KiCad project lives in the JMcordobamendez/kicad-hub repository on GitHub; these links point at the commit this page was built from.

Kicad hub: common questions

What microcontroller does the Kicad hub use?

The Kicad hub is built around the BM15x, from the Nordic nRF family.

How big is the Kicad hub PCB?

The Kicad hub measures 58.4 × 22.9 mm, has 8 copper layers and is 1.6 mm thick.

How many components are on the Kicad hub?

48 components, from 29 distinct parts. The full bill of materials is listed on this page.

Where can I download the Kicad hub design files?

From the JMcordobamendez/kicad-hub repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Kicad hub design in my own project?

Yes, under the terms of its MIT license, which JMcordobamendez chose for the repository.

Can I test firmware for the Kicad hub without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

Similar boards