10 open source boards using the nPM1300-QEXX
Real designs built with the nPM1300-QEXX, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Watch-DevKit-HW
ZSWatch
100 × 70 mm100 parts4LGPL-3.0187Nordic nRF
RoyalBlue54L-Feather
LordsBoards
58.4 × 22.9 mm48 parts8LCERN-OHL-P-2.031NPM1300-Stamp
hlord2000
18 × 18 mm16 parts4LCERN-OHL-P-2.017Watch-HW
ZSWatch
41 × 37.5 mm62 parts4LGPL-3.05ESP32
Mia ou
antoine-prrn
50 × 22 mm56 parts4LNo license1Nordic nRF
Nrf9151-tracker
chgpalmer
50.8 × 22.9 mm96 parts4LNo license0Nordic nRF
Kicad hub
JMcordobamendez
58.4 × 22.9 mm48 parts8LMIT0Nordic nRF
RoyalBlue54L-Feather
Mechse
58.4 × 22.9 mm47 parts8LCERN-OHL-P-2.00Zigbee-Thermocouple
Kampi
50 × 50 mm28 parts2LCustom license0- schematic only · 84 parts
Daedalus v0
gregtidanian
84 partsNo license0
How designs wire the nPM1300-QEXX
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the nPM1300-QEXX connects to, and the resistors, capacitors and other passives placed on it.
- The SW2 pin has a inductor on 9 of 9 designs, most often 2.2 µH.
- The VSYS pin has a decoupling capacitor on 9 of 9 designs, most often 10 µF (then 100 nF).
- The VBUS pin has a capacitor to GND on 9 of 9 designs, most often 1 µF.
- The VDDIO pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VOUT1pin 1 | Connected to: VSYS 67% · a signal 33% |
|
| PVSS1pin 2 | Connected to: GND 100% | — |
| SW1pin 3 | Connected to: Not connected 56% · a signal 44% |
|
| PVDDpin 4 | Connected to: VSYS 89% |
|
| SW2pin 5 | Connected to: Signal 100% |
|
| PVSS2pin 6 | Connected to: GND 100% | — |
| GPIO2pin 9 | Connected to: Not connected 78% · a signal 22% | — |
| GPIO3pin 10 | Connected to: Not connected 89% | — |
| VDDIOpin 12 | Connected to: VDD 100% |
|
| SDApin 13 | Connected to: BMI270 33%, BM15x 33%, APDS-9306-065 22% |
|
| SCLpin 14 | Connected to: BMI270 33%, BM15x 33%, APDS-9306-065 22% |
|
| VSET2pin 16 | Connected to: Signal 100% |
|
| VSET1pin 17 | Connected to: GND 44% · a signal 44% |
|
| NTCpin 18 | Connected to: GND 78% · a signal 22% | — |
| VBATpin 19 | Connected to: VBAT 89% |
|
| VSYSpin 20 | Connected to: VSYS 100% |
|
| VBUSpin 21 | Connected to: TPD3E001DRLR 33%, a connector 33% · VBUS_IN 33% |
|
| VBUSOUTpin 22 | Connected to: VBUS 56% · a signal 33% |
|
| CC1pin 23 | Connected to: A connector 67% |
|
| CC2pin 24 | Connected to: A connector 67% |
|
| LSIN1/VINLDO1pin 28 | Connected to: GND 44% · VSYS 33% |
|
| LSOUT1/VOUTLDO1pin 29 | Connected to: GND 44% · a signal 44% |
|
| VOUT2pin 32 | Connected to: Signal 78% · 3V 22% |
|
| AVSSpin 33 | Connected to: GND 100% | — |
9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Watch-DevKit-HW by ZSWatch, RoyalBlue54L-Feather by LordsBoards, NPM1300-Stamp by hlord2000 and Watch-HW by ZSWatch.
The nPM1300-QEXX in open source designs
The gallery holds 10 open source boards using the nPM1300-QEXX from 10 GitHub repositories; a typical one measures about 50.8 × 22.9 mm and carries around 52 components.
89% use four copper layers or more, and 60% carry an open source license.
The most starred is Watch-DevKit-HW by ZSWatch.
Parts used alongside the nPM1300-QEXX
Microcontrollers on boards using the nPM1300-QEXX
What boards using the nPM1300-QEXX are built for
nPM1300-QEXX: common questions
Where can I find a nPM1300-QEXX reference design?
Each of the 10 boards on this page is a real design using the nPM1300-QEXX. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the nPM1300-QEXX SW2 pin connected?
The SW2 pin has a inductor on 9 of 9 designs, most often 2.2 µH. Counted from the KiCad layouts of 9 open source designs using the nPM1300-QEXX.
What decoupling capacitors do designs use on the nPM1300-QEXX VSYS pin?
The VSYS pin has a decoupling capacitor on 9 of 9 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 9 open source designs using the nPM1300-QEXX.
How is the nPM1300-QEXX VBUS pin connected?
The VBUS pin has a capacitor to GND on 9 of 9 designs, most often 1 µF. Counted from the KiCad layouts of 9 open source designs using the nPM1300-QEXX.
What parts are used alongside the nPM1300-QEXX?
The BMI270, APDS-9306-065, BM15x, BMP581 and DRV2603RUNT appear in the most repositories here.
Which microcontrollers do boards using the nPM1300-QEXX use?
Most are built on Nordic nRF (4) and ESP32 (1).
How big is a typical board using the nPM1300-QEXX?
The median is 50.8 × 22.9 mm, and 11% are two-layer designs.
What is the most popular open source board using the nPM1300-QEXX?
By GitHub stars, Watch-DevKit-HW by ZSWatch, with 187 stars.
Can I simulate one of these boards using the nPM1300-QEXX before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.