WEASEL KiCad MainBoard
joebmz98·Weasel-West-Coast-Synthesiser·build/WEASEL_KiCad/WEASEL_KiCad_MainBoard.kicad_pcb
About the WEASEL KiCad MainBoard PCB
WEASEL KiCad MainBoard is an open source PCB design by joebmz98, published on GitHub under the MIT license. It is a 2-layer board measuring 335 × 200 mm, with 216 components from 87 distinct parts.
Other key parts include the AW9523B, 6N138, CD74HC4067M, 74HC165 and Electrosmith_Daisy_Seed_Rev4. By type, the board carries 65 diodes, 41 capacitors, 27 resistors, 22 connectors, 20 switches and 11 ICs.
It belongs with the audio designs in this gallery.
From the project
Digital east coast style synth heavily inspired by the Buchla Easel based on the Daisy Seed.
firmware version 0.1 | hardware version 1.0
WEASEL is a digital synthesizer inspired by the iconic Buchla Music Easel, built around the Daisy Seed platform. It features a virtual patch bay that simulates a modular experience, allowing you to route modulation sources to destinations through an intuitive button matrix interface.
- Complex Oscillator with sine wave and morphable waveform (saw/triangle/square) - Modulation Oscillator with sine, triangle, saw, and square waveforms - FM/AM Modulation between oscillators - Wavefolder for complex timbre shaping - Dual-channel Low Pass Gate (LPG)…
Main components on the WEASEL KiCad MainBoard
WEASEL KiCad MainBoard bill of materials (BOM)
216 components, 87 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | AW9523B | QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U1, U2, U10, U11 |
| 1 | 6N138 | DIP-8_W7.62mm_LongPads | U3 |
| 2 | CD74HC4067M | SOIC-24W_7.5x15.4mm_P1.27mm | U4, U5 |
| 4 | 74HC165 | SOIC-16_3.9x9.9mm_P1.27mm | U6, U7, U8, U9 |
| 1 | Electrosmith_Daisy_Seed_Rev4 | Electrosmith_Daisy_Seed | A1 |
| 1 | MIDI IN | Jack_3.5mm_CUI_SJ1-3525N_Horizontal | J1 |
| 1 | STEREO_OUTPUT | Jack_3.5mm_CUI_SJ1-3525N_Horizontal | J2 |
| 1 | SEQ_OUTPUT1 | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J3 |
| 1 | SEQ_OUTPUT2 | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J4 |
| 1 | SEQ_OUTPUT3 | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J5 |
| 1 | EG_OUTPUT1 | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J6 |
| 1 | EG_OUTPUT2 | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J7 |
| 1 | EG_OUTPUT3 | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J8 |
| 1 | PLSR_OUTPUT1 | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J9 |
| 1 | PLSR_OUTPUT2 | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J10 |
| 1 | PLSR_OUTPUT3 | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J11 |
| 1 | RNDM_OUTPUT1 | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J12 |
| 1 | RNDM_OUTPUT2 | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J13 |
| 1 | RNDM_OUTPUT3 | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J14 |
| 1 | PLSR_PERIODCTRL | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J15 |
Show 67 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MODOSC_FREQCTRL | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J16 |
| 1 | MODOSC_MODCTRL | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J17 |
| 1 | COMPOSC_PITCHCTRL | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J18 |
| 1 | COMPOSC_WAVEFOLDERCTRL | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J19 |
| 1 | LPG_LEVEL1CTRL | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J20 |
| 1 | LPG_LEVEL2CTRL | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J21 |
| 1 | Jack-DC | BarrelJack_GCT_DCJ200-10-A_Horizontal | J22 |
| 1 | miniSMDC150F/24 1A_15V LittleFuse | Fuse_1812_4532Metric | F1 |
| 1 | SQ_Step1 | Potentiometer_Bourns_PTA2043_Single_Slide | RV1 |
| 1 | SQ_Step2 | Potentiometer_Bourns_PTA2043_Single_Slide | RV2 |
| 1 | SQ_Step3 | Potentiometer_Bourns_PTA2043_Single_Slide | RV3 |
| 1 | SQ_Step4 | Potentiometer_Bourns_PTA2043_Single_Slide | RV4 |
| 1 | SQ_Step5 | Potentiometer_Bourns_PTA2043_Single_Slide | RV5 |
| 1 | EG_ATTACK | Potentiometer_Bourns_PTA2043_Single_Slide | RV6 |
| 1 | EG_SUSTAIN | Potentiometer_Bourns_PTA2043_Single_Slide | RV7 |
| 1 | EG_DECAY | Potentiometer_Bourns_PTA2043_Single_Slide | RV8 |
| 1 | PLSR_PERIODCTRL | Potentiometer_Bourns_PTA2043_Single_Slide | RV9 |
| 1 | PLSR_PERIOD | Potentiometer_Bourns_PTA2043_Single_Slide | RV10 |
| 1 | MODOSC_FREQCTRL | Potentiometer_Bourns_PTA2043_Single_Slide | RV11 |
| 1 | MODOSC_FREQ | Potentiometer_Bourns_PTA2043_Single_Slide | RV12 |
| 1 | MODOSC_MODULATIONCTRL | Potentiometer_Bourns_PTA2043_Single_Slide | RV13 |
| 1 | MODOSC_MODULATION | Potentiometer_Bourns_PTA2043_Single_Slide | RV14 |
| 1 | MODOSC_FINE | Potentiometer_RV09 | RV15 |
| 1 | COMPLEXOSC_FREQCTRL | Potentiometer_Bourns_PTA2043_Single_Slide | RV16 |
| 1 | COMPLEXOSC_FREQ | Potentiometer_Bourns_PTA2043_Single_Slide | RV17 |
| 1 | COMPLEXOSC_FINE | Potentiometer_RV09 | RV18 |
| 1 | COMPLEXOSC_WAVEFOLDERCTRL | Potentiometer_Bourns_PTA2043_Single_Slide | RV19 |
| 1 | COMPLEXOSC_WAVEFOLDER | Potentiometer_Bourns_PTA2043_Single_Slide | RV20 |
| 1 | COMPLEXOSC_TIMBRE | Potentiometer_RV09 | RV21 |
| 1 | LPG_LEVEL1CTRL | Potentiometer_Bourns_PTA2043_Single_Slide | RV22 |
| 1 | LPG_LEVEL1 | Potentiometer_Bourns_PTA2043_Single_Slide | RV23 |
| 1 | LPG_LEVEL2CTRL | Potentiometer_Bourns_PTA2043_Single_Slide | RV24 |
| 1 | LPG_LEVEL2 | Potentiometer_Bourns_PTA2043_Single_Slide | RV25 |
| 1 | CLOCK | Potentiometer_RV09 | RV26 |
| 1 | REVERB_MIX | Potentiometer_RV09 | RV27 |
| 1 | MASTER | Potentiometer_RV09 | RV28 |
| 1 | SEQ_TRIGGERSELECT | SW_PUSH_6mm_H13mm | SW1 |
| 1 | SEQ_STAGES | SW_PUSH_6mm_H13mm | SW2 |
| 1 | EG_TRIGGERSELECT | SW_PUSH_6mm_H13mm | SW3 |
| 1 | EG_MODESELECT | SW_PUSH_6mm_H13mm | SW4 |
| 1 | PLSR_TRIGGERSELECT | SW_PUSH_6mm_H13mm | SW5 |
| 1 | PLSR_MODE | SW_PUSH_6mm_H13mm | SW6 |
| 1 | MODOSC_MODULATIONMODE | SW_PUSH_6mm_H13mm | SW7 |
| 1 | MODOSC_WAVEFORMTOGGLE | SW_PUSH_6mm_H13mm | SW8 |
| 1 | OSCILLATOR_MIDITOGGLE | SW_PUSH_6mm_H13mm | SW9 |
| 1 | COMPLEXOSC_POLARITY | SW_PUSH_6mm_H13mm | SW10 |
| 1 | COMPLEXOSC_WAVETOGGLE | SW_PUSH_6mm_H13mm | SW11 |
| 1 | LPG_GATE1MODE | SW_PUSH_6mm_H13mm | SW12 |
| 1 | LPG_GATE2MODE | SW_PUSH_6mm_H13mm | SW13 |
| 1 | RNDMVOLTAGE_TRIGGERSELECT | SW_PUSH_6mm_H13mm | SW14 |
| 1 | CLOCK_SYNCTOGGLE | SW_PUSH_6mm_H13mm | SW15 |
| 1 | SQ_TOGGLESTEP1 | ToggleSwitch_MTS-102_SPDT | SW16 |
| 1 | SQ_TOGGLESTEP2 | ToggleSwitch_MTS-102_SPDT | SW17 |
| 1 | SQ_TOGGLESTEP3 | ToggleSwitch_MTS-102_SPDT | SW18 |
| 1 | SQ_TOGGLESTEP4 | ToggleSwitch_MTS-102_SPDT | SW19 |
| 1 | SQ_TOGGLESTEP5 | ToggleSwitch_MTS-102_SPDT | SW20 |
| 12 | 1N4148 | D_SOD-123 | D1, D10, D11, D12, D13, D23, D24, D25 +4 |
| 1 | 1N5817 | D_SOD-123 | D2 |
| 52 | LED | LED_0603_1608Metric | D3, D4, D5, D6, D7, D8, D9, D14 +44 |
| 11 | 0603YC104KAT2A 100nF_0603_16V AVX Corporation | C_1206_3216Metric | C1, C2, C31, C34, C35, C36, C37, C38 +3 |
| 28 | C_Generic | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C4, C5, C6, C7, C8, C9, C10 +20 |
| 1 | 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C32 |
| 1 | 100uF_25V | CP_Radial_D6.3mm_P2.50mm | C33 |
| 1 | 220R | R_0603 | R1 |
| 1 | 470R | R_0603 | R2 |
| 1 | 1k | R_0603 | R3 |
| 24 | RT0402FRE0710KL 10k_0402 Yageo | R_0603 | R4, R5, R6, R7, R8, R9, R10, R11 +16 |
WEASEL KiCad MainBoard design files
The KiCad project lives in the joebmz98/Weasel-West-Coast-Synthesiser repository on GitHub; these links point at the commit this page was built from.
WEASEL KiCad MainBoard: common questions
How big is the WEASEL KiCad MainBoard PCB?
The WEASEL KiCad MainBoard measures 335 × 200 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the WEASEL KiCad MainBoard?
216 components, from 87 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the WEASEL KiCad MainBoard design files?
From the joebmz98/Weasel-West-Coast-Synthesiser repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the WEASEL KiCad MainBoard design in my own project?
Yes, under the terms of its MIT license, which joebmz98 chose for the repository.
More boards in Weasel-West-Coast-Synthesiser
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687