S3P

kanaboid·elektronika·mikrokontrolery/esp32/s3p/S3P.kicad_pcb

S3P PCB layout, top view — open source ESP32 board by kanaboid

About the S3P PCB

S3P is an open source ESP32 PCB design by kanaboid, published on GitHub. It is a 4-layer board measuring 32.2 × 34.2 mm, with 56 components from 48 distinct parts.

Its main chip is the ESP32-S3, from the ESP32 family. Other key parts include the W25Q128JVPIQ, W25Q128JVS, MCP73831-2-OT, AMS1117-3.3 and TLV76733DRVx. By type, the board carries 22 capacitors, 13 resistors, 6 ICs, 4 diodes, 3 connectors and 2 switches.

From the project

Haase Industries S3P boards: Arduino IDE code and KiCad schematic.

Haase Industries S3P boards: Arduino IDE code and KiCad schematic.

I'll comment the Arduino sketches properly in a few weeks, but, meanwhile, ask me anything about the code or the schematic on my YouTube video, and I'll be sure to respond to it.

Here's the video about this project: https://youtu.be/9oY4NeJDy-g

Thanks to PCBWay for sponsoring this project! Get $5 of New User Free Credit by following this link - https://pcbway.com/g/x5f10h

Main components on the S3P

S3P bill of materials (BOM)

56 components, 48 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
W25Q128JVPIQ
IC1
1
ESP32-S3
ESP32-S3R8
U1
1
W25Q128JVS
4492
U2
1
MCP73831-2-OT
USBLC6-2P6
U3
1
AMS1117-3.3
TLV76733DRVx
U4
1
TLV76733DRVx
U5
1
AO3401A
BC817-25L
Q1
1
ECS-400-10-37B2-CKM-TR
Y1
1
USB_C_RECEPTACLE_USB2.0_14P
USB_C_Receptacle_USB2.0
J1
1
CONN_01X02_PIN
Conn_02x09_Odd_Even
J2
1
CONN_01X18_PIN
Conn_02x09_Odd_Even
J3
1
2450AT18D0100E
ANT1
1
CMT-0525-75-SMT-TR
LS1
2
SW_SPST
SW1, SW2
1
PMEG6020AELR
D1
1
CG0603MLU-24E
D2
1
SS14
PMEG6020AELR
D4
1
LTST-C190GKT
D5
1
2nH
L1
1
2.4nH
L2
Show 28 more
QtyPartRefs
2
0.1uF
C1, C12
1
10UF
1uF
C2
1
10UF
12pF
C3
1
12PF
12pF
C4
2
1uF
C5, C9
1
10UF
10nF
C6
2
10UF
0.1uF
C7, C8
1
0.1UF
10uF
C10
1
0.1UF
0.1uF
C11
1
1UF
0.1uF
C13
1
1uF
C14
1
0.1UF
2.2uF
C15
1
10UF
1uF
C16
1
10UF
2.2uF
C17
1
0.1UF
2.7pF
C18
1
0.1UF
2.4pF
C19
1
10UF
NC
C20
1
NC
C21
1
0.1UF
1uF
C22
4
0
R1, R3, R5, R10
1
33R
0
R2
1
10K
0
R4
1
120
R6
1
22
R7
2
5.1k
R8, R9
1
10K
R11
1
200K
422
R12
1
100K
R13

S3P design files

The KiCad project lives in the kanaboid/elektronika repository on GitHub; these links point at the commit this page was built from.

S3P: common questions

What microcontroller does the S3P use?

The S3P is built around the ESP32-S3, from the ESP32 family.

How big is the S3P PCB?

The S3P measures 32.2 × 34.2 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the S3P?

56 components, from 48 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the S3P design files?

From the kanaboid/elektronika repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the S3P design in my own project?

The repository has no license, so all rights stay with kanaboid. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the S3P without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in elektronika

Similar boards