Guardian

kian09·Guardian·hardware/first_design.kicad_pcb

Guardian PCB layout, top view — open source ESP32 board by kian09

About the Guardian PCB

Guardian is an open source ESP32 PCB design by kian09, published on GitHub. It is a 2-layer board measuring 55 × 40.1 mm, with 49 components from 21 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N16R8, from the ESP32 family. Other key parts include the BQ24075RGT, TPS7A0518PDBVT, TLV75733PDBV, MPU-6050 and MAX30102EFD+. By type, the board carries 18 capacitors, 14 resistors, 6 ICs, 3 connectors, 3 LEDs and 1 diode.

It belongs with the sensors, iot & wireless and wearables designs in this gallery.

From the project

A compact health monitoring device that is worn on the wrist. Its capabilities are measuring your heart rate and detecting accidental falls using an accelerometer.

- Blueprint: https://blueprint.hackclub.com/projects/12900

Guardian, from the project README
From the project README

Main components on the Guardian

Guardian bill of materials (BOM)

49 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
BQ24075RGT
U2
1
TPS7A0518PDBVT
U3
1
TLV75733PDBV
U5
1
ESP32-S3-WROOM-1-N16R8
U6
1
MPU-6050
U8
1
MAX30102EFD+
U9
1
PH1-06-UA
Conn_01x06
J1
1
S2B-EH
Battery Connector JST
J2
1
PJ-102AH
Barrel_Jack
J3
4
5001
TestPoint
1V8, 3V3, BAT1, GND1
3
LTST-C171KGKT
LED
CHG1, PGOOD1, PWR1
1
B140-13-F
D2
8
CL10A106KP8NNNC
10µF
C1, C3, C5, C7, C11, C12, C14, C19
2
CL10A475KP8NNNC
4.7µF
C2, C17
7
C0603C104K5RACTU
0.1µF
C4, C6, C8, C9, C10, C13, C15
1
C0805C222F5GACTU
2200pF
C16
3
RC0603FR-07120RL
120Ω
R1, R7, R10
4
RC0603FR-0710KL
10K
R2, R6, R8, R9
5
RC0603FR-074K7L
4.7K
R3, R13, R14, R15, R16
1
RMCF0603FT1K13
1.13K
R4
Show 1 more
QtyPartRefs
1
RMCF0805JT1K10
1.1K
R5

Guardian design files

The KiCad project lives in the kian09/Guardian repository on GitHub; these links point at the commit this page was built from.

Guardian: common questions

What microcontroller does the Guardian use?

The Guardian is built around the ESP32-S3-WROOM-1-N16R8, from the ESP32 family.

How big is the Guardian PCB?

The Guardian measures 55 × 40.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Guardian?

49 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Guardian design files?

From the kian09/Guardian repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Guardian design in my own project?

The repository has no license, so all rights stay with kian09. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Guardian without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards