11 open source boards using the TPS7A0518PDBVT

Real designs built with the TPS7A0518PDBVT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the TPS7A0518PDBVT

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS7A0518PDBVT connects to, and the resistors, capacitors and other passives placed on it.

  • The VOUT pin has a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 4.7 µF).
  • The VIN pin has a decoupling capacitor on 4 of 5 designs.
  • The EN pin has a series resistor on 4 of 5 designs.
VINpin 1Connected to: 5V 100%
  • Decoupling capacitor on 80%
GNDpin 2Connected to: GND 100%
ENpin 3Connected to: Signal 80% · 3.3V 20%
  • Series resistor on 80%
NCpin 4Connected to: Not connected 100%
VOUTpin 5Connected to: 1.8V 100%
  • Decoupling capacitor on 100% · 10 µF (1), 4.7 µF (1), 100 nF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Jetson-AI-Cam-CopperPilot by CopperPilot, Jetson Orin Baseboard by AtlasAutoware, Capable jetson carrier by CapableRobot and Guardian by kian09.

The TPS7A0518PDBVT in open source designs

The gallery holds 11 open source boards using the TPS7A0518PDBVT from 6 GitHub repositories; a typical one measures about 72 × 55 mm and carries around 344 components.

90% use four copper layers or more, and 82% carry an open source license.

The most starred is Snapdragon-845-baseboard by antmicro.

Microcontrollers on boards using the TPS7A0518PDBVT

TPS7A0518PDBVT: common questions

Where can I find a TPS7A0518PDBVT reference design?

Each of the 11 boards on this page is a real design using the TPS7A0518PDBVT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TPS7A0518PDBVT VOUT pin?

The VOUT pin has a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the TPS7A0518PDBVT.

What decoupling capacitors do designs use on the TPS7A0518PDBVT VIN pin?

The VIN pin has a decoupling capacitor on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TPS7A0518PDBVT.

What resistor goes on the TPS7A0518PDBVT EN pin?

The EN pin has a series resistor on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TPS7A0518PDBVT.

What parts are used alongside the TPS7A0518PDBVT?

The AT24CS01-ST, PCA9547BS,118, SN74LVC1G126DCKR, SN74LXC1T45DBVR and 74HC00PW appear in the most repositories here.

Which microcontrollers do boards using the TPS7A0518PDBVT use?

Most are built on STM32 (5) and ESP32 (3).

How big is a typical board using the TPS7A0518PDBVT?

The median is 72 × 55 mm, and 10% are two-layer designs.

What is the most popular open source board using the TPS7A0518PDBVT?

By GitHub stars, Snapdragon-845-baseboard by antmicro, with 70 stars.

Can I simulate one of these boards using the TPS7A0518PDBVT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part