ESP32 BLEKeyBoard
KK153402·ESP32_BLEKeyBoard·hardware/ESP32_BLEKeyBorad.kicad_sch

About the ESP32 BLEKeyBoard PCB
ESP32 BLEKeyBoard is an open source ESP32 PCB design by KK153402, published on GitHub. It is a board, with 52 components from 24 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the TP4056, FT231XS, DW01A, MX1A-11NN and NJM2845DL1-33-TE1. By type, the board carries 18 resistors, 11 capacitors, 8 diodes, 7 ICs, 4 transistors and 3 switches.
It belongs with the iot & wireless and power & battery designs in this gallery.
From the project
ESP32-C3 BLEKeyBoard
A compact wireless keyboard with 2 programmable keys, built around the ESP32-C3 microcontroller. Communicates via Bluetooth Low Energy (BLE) and is powered by a Li-ion battery with USB-C charging.
- 2-key BLE HID Keyboard — works with PC, Mac, Android, and iOS - Battery powered — single-cell Li-ion (3.7V) - USB Type-C charging — with TP4056 + protection circuit - Auto-programming — no need to manually press BOOT/EN buttons (FT231XS + auto-reset circuit) - Compact design — easy to carry and use at a workstation
Main components on the ESP32 BLEKeyBoard
ESP32 BLEKeyBoard bill of materials (BOM)
52 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP4056 | TP4056 | U1 |
| 1 | FT231XS | FT231XS | U2 |
| 1 | DW01A | DW01A | U3 |
| 2 | MX1A-11NN | CHERRY_MX1A-11NN_SWITCH | U4, U5 |
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U6 |
| 1 | NJM2845DL1-33-TE1 | NJM2845 | U7 |
| 1 | FS8205A | FS8205A | Q1 |
| 1 | SSM3J332R_LF | SSM3J332R_2 | Q2 |
| 2 | 2SC2712 | 2SC2712 | Q3, Q4 |
| 1 | 5077CR-16SMC2-BK 5077CR-16SMC2-BK-TR | 5077CR-16SMC2-BK-TR | J1 |
| 2 | TVAF06-A020B-R | TVAF06A020BR | SW1, SW2 |
| 1 | SS-12D00G3 | SS-12D00G3 | SW3 |
| 2 | SML-E12Y8WT86 | LEDC1608X36N | D1, D2 |
| 2 | SML-E12V8WT86 | LEDC1608X36N | D3, D4 |
| 2 | SML-E12P8WT86 | LEDC1608X36N | D5, D8 |
| 2 | CUS01 | CUS01TE85LQM | D6, D7 |
| 8 | GRM188F11H104ZA01 | C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C10 |
| 1 | GRM188R6YA106MA73 | C_0603_1608Metric | C8 |
| 1 | GRM188R71E474KA12D | C_0603_1608Metric | C9 |
| 1 | GRM188B3YA225KA12D | C_0603_1608Metric | C11 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | RPC05KT512J | R_0603_1608Metric | R1, R3 |
| 8 | RPC05KT102J | R_0603_1608Metric | R2, R4, R5, R6, R7, R9, R12, R16 |
| 7 | RPC05KT103J | R_0603_1608Metric | R8, R10, R13, R14, R15, R17, R18 |
| 1 | RPC05KT101J | R_0603_1608Metric | R11 |
ESP32 BLEKeyBoard design files
The KiCad project lives in the KK153402/ESP32_BLEKeyBoard repository on GitHub; these links point at the commit this page was built from.
ESP32 BLEKeyBoard: common questions
What microcontroller does the ESP32 BLEKeyBoard use?
The ESP32 BLEKeyBoard is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How many components are on the ESP32 BLEKeyBoard?
52 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32 BLEKeyBoard design files?
From the KK153402/ESP32_BLEKeyBoard repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32 BLEKeyBoard design in my own project?
The repository has no license, so all rights stay with KK153402. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32 BLEKeyBoard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k