HardLabs

NewSkyF7-Air

kuku-199·NewSky·HDK/NewSkyF7-Air/NewSkyF7-Air.kicad_pcb

NewSkyF7-Air PCB layout, top view — open source STM32 board by kuku-199

About the NewSkyF7-Air PCB

NewSkyF7-Air is an open source STM32 PCB design by kuku-199, published on GitHub under the Apache-2.0 license. It is a 4-layer board measuring 36 × 36 mm, with 145 components from 52 distinct parts.

Its main chip is the STM32F745VGH6, from the STM32 family. Other key parts include the MP9943GQ-Z, ICM-42688-P, W25Q256JVEIQ, TLV62569DBV and USB_C_16P. By type, the board carries 45 capacitors, 40 connectors, 37 resistors, 10 ICs, 7 diodes and 3 inductors.

From the project

Supports multiple firmware options💿 NewSky Currently possessingPX4 Betaflight Inav Ardupolit firmware

Supports multiple firmware options💿 NewSky Currently possessingPX4 Betaflight Inav Ardupolit firmware

Having different flight control models⚙️ NewSky use STM32 series as the main controller

- STM32F745VG(Cortex-M7) - Have three BEC (Max input 36V) - 12V 3A - 5V 3A - 3V3 2A - Have two IMU - BMI270 - IMC4288P - On-board barometer(MS5611) - On-board FLASH(W25Q256/W25N01G) - On-board OSD(AT7456) > In addition to the provided pad, which can be soldered, the board can use JST-SH

NewSkyF7-Air, from the project README
From the project README

Main components on the NewSkyF7-Air

MP9943GQ-ZICM-42688-PW25Q256JVEIQTLV62569DBVSTM32F745VGH6USB_C_16PAT7456EBMI270MS5611-01BA

NewSkyF7-Air bill of materials (BOM)

145 components, 52 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
MP9943GQ-Z
IC1, IC2
1
ICM-42688-P
IC3
1
W25Q256JVEIQ
IC4
1
TLV62569DBV
U1
1
STM32F745VGH6
U2
1
USB_C_16P
U4
1
AT7456E
U5
1
BMI270
U6
1
MS5611-01BA
U8
1
25M
Y1
1
27M
Y2
1
SBUS
J1
1
VTX
J2
1
Camera
J3
1
Input
J4
34
CONN_01X01_SOCKET
Conn_01x01_Socket
J5, J6, J7, J8, J9, J10, J11, J12 +26
1
~
J35
1
CONN_01X10_SOCKET
Conn_01x10_Socket
J36
1
BOOT0
SW1
3
LESD3Z5.0CMT1G
D1, D2, D3
Show 32 more
QtyPartRefs
1
Red
D4
1
Yellow
D5
1
Blue
D6
1
K24
D7
1
2.2UH
2.2uH
L1
2
L
L2, L3
4
10UF
10uF
C1, C2, C3, C4
21
100NF
100nF
C5, C6, C8, C9, C22, C24, C25, C27 +13
1
4.7UF
4.7uF
C7
2
100NF
100nF
C10, C11
1
6.8PF
6.8pF
C12
3
10UF
10uF
C13, C16, C19
4
22UF
22uF
C14, C15, C17, C18
2
15PF
15pF
C20, C21
1
4.7UF
4.7uF
C23
3
2.2UF
2.2uF
C26, C28, C45
2
47UF
47uF
C34, C35
1
10NF
10nF
C43
6
100K
R1, R2, R3, R4, R6, R33
1
442K
R5
2
51K
R7, R9
4
22R
R8, R10, R24, R25
1
3K
R11
1
7.68K
R12
2
41.2K
R13, R14
7
10K
R15, R18, R19, R29, R30, R34, R35
4
1K
R16, R20, R21, R26
1
3.3K
R17
2
5.1K
R22, R23
2
75R
R27, R28
2
[N/S]
R31, R32
2
22R
RN1, RN2

NewSkyF7-Air design files

The KiCad project lives in the kuku-199/NewSky repository on GitHub; these links point at the commit this page was built from.

NewSkyF7-Air: common questions

What microcontroller does the NewSkyF7-Air use?

The NewSkyF7-Air is built around the STM32F745VGH6, from the STM32 family.

How big is the NewSkyF7-Air PCB?

The NewSkyF7-Air measures 36 × 36 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the NewSkyF7-Air?

145 components, from 52 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the NewSkyF7-Air design files?

From the kuku-199/NewSky repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the NewSkyF7-Air design in my own project?

Yes, under the terms of its Apache-2.0 license, which kuku-199 chose for the repository.

Can I test firmware for the NewSkyF7-Air without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in NewSky

Similar boards