SPECTRA-MX-1-
landjas09·SPECTRA-MX-1-
About the SPECTRA-MX-1- PCB
SPECTRA-MX-1- is an open source STM32 PCB design by landjas09, published on GitHub. It is a 4-layer board measuring 60 × 75 mm, with 110 components from 40 distinct parts.
Its main chip is the STM32F103CBT6, from the STM32 family. Other key parts include the TLV62569DBVR, HT7533-1, MCP6001U, USBLC6-2SC6 and ADC141S626CIMM/NOPB. By type, the board carries 45 capacitors, 36 resistors, 11 ICs, 9 diodes, 4 connectors and 4 inductors.
From the project
A four-layer mixed-signal PCB designed in KiCad for analog signal acquisition and generation, targeting the 20 Hz–20 kHz range.
STM32-controlled mixed-signal acquisition and generation board
SPECTRA MX-1 is a four-layer PCB designed in KiCad for low-frequency analog acquisition and signal generation, with a target operating band of 20 Hz–20 kHz. An STM32F103 controls an external differential-input ADC and a dual-channel DAC through separate SPI interfaces. The board combines input conditioning, active filtering, reference generation, USB-C connectivity and BNC analog connectors.

Main components on the SPECTRA-MX-1-
SPECTRA-MX-1- bill of materials (BOM)
110 components, 40 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLV62569DBVR | TLV-SOT95P280X145-5N | U100 |
| 1 | HT7533-1 | LDO-SOT89 | U101 |
| 4 | MCP6001U | SOT-23-5 | U102, U300, U301, U401 |
| 1 | STM32F103CBT6 STM32F103CBTx STMicroelectronics | STM-LQFP-48_7x7mm_P0.5mm | U200 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U201 |
| 1 | ADC141S626CIMM/NOPB | SOIC-10-adc141s626 | U302 |
| 1 | REF3033 | SOT-23 | U303 |
| 1 | DAC7563SDGSR | SOIC-10-adc141s626 | U400 |
| 1 | 16MHZ 16Mhz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y200 |
| 1 | CONN_02X05_ODD_EVEN Conn_02x05_Odd_Even | PinHeader_2x05_P1.27mm_Vertical | J200 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J201 |
| 2 | Conn_Coaxial | BNC_Amphenol_B6252HB-NPP3G-50_Horizontal | J300, J400 |
| 1 | GREEN | LED_0603_1608Metric | D100 |
| 7 | CDSOD323-T03C | SOD2513X114N | D200, D201, D203, D204, D205, D300, D400 |
| 1 | LED_ARGB | LED_RGB_Wuerth-PLCC4_3.2x2.8mm_150141M173100 | D206 |
| 1 | 100N 100n | L_0402_1005Metric | L100 |
| 1 | MWSA0603S-150MT Shenzhen Sunlord Electronics Co. Ltd. | INDM7066X300N | L101 |
| 1 | CMF3216F-900-2P-T | CMC-1206 | L200 |
| 1 | 10N 10n | L_0402_1005Metric | L201 |
| 5 | 1u | C_0603_1608Metric | C100, C101, C206, C207, C402 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 22U 22u | C_0805_2012Metric | C102, C103, C104, C105, C107 |
| 1 | DNP | C_0402_1005Metric | C106 |
| 16 | 100N 100n | C_0402_1005Metric | C108, C201, C202, C203, C204, C210, C211, C212 +8 |
| 7 | 10U 10u | C_0603_1608Metric | C200, C308, C309, C310, C312, C315, C400 |
| 1 | 10N 10n | C_0402_1005Metric | C205 |
| 2 | 10P 10p | C_0402_1005Metric | C208, C209 |
| 4 | 150P 150p | C_0402_1005Metric | C300, C304, C307, C404 |
| 4 | 1n | C_0402_1005Metric | C303, C305, C403, C406 |
| 1 | 10R | R_0805_2012Metric | R100 |
| 1 | 100K 100k | R_0402_1005Metric | R101 |
| 3 | 22K 22k | R_0402_1005Metric | R102, R304, R403 |
| 9 | 1k | R_0402_1005Metric | R103, R104, R105, R207, R208, R209, R300, R306 +1 |
| 4 | 10K 10k | R_0402_1005Metric | R200, R202, R203, R402 |
| 3 | 0R | R_0402_1005Metric | R201, R309, R400 |
| 1 | 1K5 1k5 | R_0402_1005Metric | R204 |
| 2 | 5K1 5k1 | R_0402_1005Metric | R205, R206 |
| 6 | 49R9 | R_0402_1005Metric | R210, R211, R212, R213, R308, R405 |
| 2 | 2M2 | R_0402_1005Metric | R301, R302 |
| 2 | 6K8 6k8 | R_0402_1005Metric | R303, R401 |
| 2 | 12K 12k | R_0402_1005Metric | R305, R404 |
SPECTRA-MX-1- design files
The KiCad project lives in the landjas09/SPECTRA-MX-1- repository on GitHub; these links point at the commit this page was built from.
SPECTRA-MX-1-: common questions
What microcontroller does the SPECTRA-MX-1- use?
The SPECTRA-MX-1- is built around the STM32F103CBT6, from the STM32 family.
How big is the SPECTRA-MX-1- PCB?
The SPECTRA-MX-1- measures 60 × 75 mm, has 4 copper layers and is 1.5954 mm thick.
How many components are on the SPECTRA-MX-1-?
110 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SPECTRA-MX-1- design files?
From the landjas09/SPECTRA-MX-1- repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SPECTRA-MX-1- design in my own project?
The repository has no license, so all rights stay with landjas09. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SPECTRA-MX-1- without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k