22 open source boards using the REF3033

Real designs built with the REF3033, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

22 boardsClear filters|Most starred

How designs wire the REF3033

Read from the KiCad layouts of 20 open source designs, one per repository: what each pin of the REF3033 connects to, and the resistors, capacitors and other passives placed on it.

  • The IN pin is tied to 5V on 16 of 20 designs (a signal on 4).
  • The OUT pin has a capacitor to GND on 11 of 20 designs, most often 100 nF (then 1 µF).
INpin 1Connected to: 5V 80% · a signal 20%
OUTpin 2Connected to: The microcontroller 20% · VDDA 45%
  • Capacitor to GND on 55% · 100 nF (11), 1 µF (4), 10 µF (3)
GNDpin 3Connected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FOME Open Source Wideband O2 Module by mck1117, Proteus by mck1117, Lambda x2 by rusefi and WBO by andreika-git.

The REF3033 in open source designs

The gallery holds 22 open source boards using the REF3033 from 20 GitHub repositories; a typical one measures about 96.5 × 82.5 mm and carries around 187 components.

91% use four copper layers or more, and 45% carry an open source license.

The most starred is FOME Open Source Wideband O2 Module by mck1117.

Microcontrollers on boards using the REF3033

REF3033: common questions

Where can I find a REF3033 reference design?

Each of the 22 boards on this page is a real design using the REF3033. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the REF3033 IN pin connected?

The IN pin is tied to 5V on 16 of 20 designs (a signal on 4). Counted from the KiCad layouts of 20 open source designs using the REF3033.

How is the REF3033 OUT pin connected?

The OUT pin has a capacitor to GND on 11 of 20 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 20 open source designs using the REF3033.

What parts are used alongside the REF3033?

The MCP6004, AD8628, AMS1117-3.3, SRV05-4 and STM32F042K6TX appear in the most repositories here.

Which microcontrollers do boards using the REF3033 use?

Most are built on STM32 (19), ESP32 (1) and RP2040/RP2350 (1).

How big is a typical board using the REF3033?

The median is 96.5 × 82.5 mm, and 9% are two-layer designs.

What is the most popular open source board using the REF3033?

By GitHub stars, FOME Open Source Wideband O2 Module by mck1117, with 76 stars.

Can I simulate one of these boards using the REF3033 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part