7 open source boards using the ADC141S626CIMM/NOPB
Real designs built with the ADC141S626CIMM/NOPB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Mixed-Signal-Guitar-Effects-Pedal
danromero1
60 × 75 mm110 parts4LMIT2STM32
Course MixedSignal
dpmj
55 × 80 mm110 parts4LCERN-OHL-S-2.02STM32
Mxed Signal
cristobalcuevas
60 × 75 mm110 parts4LNo license0STM32
MixSig
a-s-adam
59.9 × 73.3 mm110 parts4LNo license0STM32
SPECTRA-MX-1-
landjas09
60 × 75 mm110 parts4LNo license0STM32
Fatigue-Measurement-Board
JJ80901
58 × 85 mm79 parts4LNo license0STM32
Mixed Signal Board
AhmedAbo-Eita
72.1 × 99 mm116 parts4LNo license3
How designs wire the ADC141S626CIMM/NOPB
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the ADC141S626CIMM/NOPB connects to, and the resistors, capacitors and other passives placed on it.
- The VREF pin has a capacitor to GND on 7 of 7 designs, most often 10 µF (then 100 nF).
- The +IN pin has a series capacitor on 7 of 7 designs, most often 150 pF.
- The +IN pin has a series resistor on 7 of 7 designs, most often 1 kΩ.
- The -IN pin has a series capacitor on 7 of 7 designs, most often 150 pF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VREFpin 1 | Connected to: REF3033AIDBZT 86% |
|
| +INpin 2 | Connected to: Signal 100% |
|
| -INpin 3 | Connected to: Signal 100% |
|
| GNDpin 4, 5 | Connected to: GND 100% | — |
| NCSpin 6 | Connected to: The microcontroller 100% |
|
| SCLKpin 8 | Connected to: Signal 100% |
|
| VIOpin 9 | Connected to: 3.3V 100% |
|
| VApin 10 | Connected to: 3.3V 100% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mixed Signal Board by AhmedAbo-Eita, Mixed-Signal-Guitar-Effects-Pedal by danromero1, Course MixedSignalKicad by dpmj and MixSigPCB by a-s-adam.
The ADC141S626CIMM/NOPB in open source designs
The gallery holds 7 open source boards using the ADC141S626CIMM/NOPB from 7 GitHub repositories; a typical one measures about 60 × 75 mm and carries around 110 components.
100% use four copper layers or more, and 29% carry an open source license.
The most starred is Mixed Signal Board by AhmedAbo-Eita.
Parts used alongside the ADC141S626CIMM/NOPB
Microcontrollers on boards using the ADC141S626CIMM/NOPB
What boards using the ADC141S626CIMM/NOPB are built for
ADC141S626CIMM/NOPB: common questions
Where can I find a ADC141S626CIMM/NOPB reference design?
Each of the 7 boards on this page is a real design using the ADC141S626CIMM/NOPB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ADC141S626CIMM/NOPB VREF pin connected?
The VREF pin has a capacitor to GND on 7 of 7 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the ADC141S626CIMM/NOPB.
How is the ADC141S626CIMM/NOPB +IN pin connected?
The +IN pin has a series capacitor on 7 of 7 designs, most often 150 pF. Counted from the KiCad layouts of 7 open source designs using the ADC141S626CIMM/NOPB.
How is the ADC141S626CIMM/NOPB -IN pin connected?
The -IN pin has a series capacitor on 7 of 7 designs, most often 150 pF. Counted from the KiCad layouts of 7 open source designs using the ADC141S626CIMM/NOPB.
What parts are used alongside the ADC141S626CIMM/NOPB?
The USBLC6-2SC6, HT7533-1, MCP6001T-E/OT, REF3033AIDBZT and DAC7563SDGSR appear in the most repositories here.
Which microcontrollers do boards using the ADC141S626CIMM/NOPB use?
Most are built on STM32 (7).
How big is a typical board using the ADC141S626CIMM/NOPB?
The median is 60 × 75 mm, and 0% are two-layer designs.
What is the most popular open source board using the ADC141S626CIMM/NOPB?
By GitHub stars, Mixed Signal Board by AhmedAbo-Eita, with 3 stars.
Can I simulate one of these boards using the ADC141S626CIMM/NOPB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.