7 open source boards using the DAC7563SDGSR

Real designs built with the DAC7563SDGSR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the DAC7563SDGSR

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the DAC7563SDGSR connects to, and the resistors, capacitors and other passives placed on it.

  • The VOUT_A pin has a series resistor on 7 of 7 designs, most often 6.8 kΩ.
  • The VOUT_B pin has a resistor to GND on 7 of 7 designs, most often 10 kΩ.
  • The AVDD pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 10 µF).
  • The VREFIN/VREFOUT pin has a capacitor to GND on 7 of 7 designs, most often 1 µF (then 1 nF).
VOUT_Apin 1Connected to: Signal 100%
  • Series resistor on 100% · 6.8 kΩ (7)
VOUT_Bpin 2Connected to: Signal 100%
  • Resistor to GND on 100% · 10 kΩ (7)
GNDpin 3Connected to: GND 100%
NSYNCpin 6Connected to: The microcontroller 100%
  • Pull-up to 3.3V on 86% · 10 kΩ (6)
SCLKpin 7Connected to: Signal 100%
  • Series resistor on 86% · 0 Ω (6)
AVDDpin 9Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (7), 10 µF (7)
VREFIN/VREFOUTpin 10Connected to: Signal 100%
  • Capacitor to GND on 100% · 1 µF (6), 1 nF (1)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mixed Signal Board by AhmedAbo-Eita, Course MixedSignalKicad by dpmj, MixSigPCB by a-s-adam and Mixed-Signal STM32 PCB by cipher8-0.

The DAC7563SDGSR in open source designs

The gallery holds 7 open source boards using the DAC7563SDGSR from 7 GitHub repositories; a typical one measures about 60 × 78 mm and carries around 110 components.

100% use four copper layers or more, and 29% carry an open source license.

The most starred is Mixed Signal Board by AhmedAbo-Eita.

Microcontrollers on boards using the DAC7563SDGSR

DAC7563SDGSR: common questions

Where can I find a DAC7563SDGSR reference design?

Each of the 7 boards on this page is a real design using the DAC7563SDGSR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the DAC7563SDGSR VOUT_A pin?

The VOUT_A pin has a series resistor on 7 of 7 designs, most often 6.8 kΩ. Counted from the KiCad layouts of 7 open source designs using the DAC7563SDGSR.

What resistor goes on the DAC7563SDGSR VOUT_B pin?

The VOUT_B pin has a resistor to GND on 7 of 7 designs, most often 10 kΩ. Counted from the KiCad layouts of 7 open source designs using the DAC7563SDGSR.

What decoupling capacitors do designs use on the DAC7563SDGSR AVDD pin?

The AVDD pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the DAC7563SDGSR.

What parts are used alongside the DAC7563SDGSR?

The USBLC6-2SC6, ADC141S626CIMM/NOPB, HT7533-1, REF3033AIDBZT and MCP6001T-E/OT appear in the most repositories here.

Which microcontrollers do boards using the DAC7563SDGSR use?

Most are built on STM32 (7).

How big is a typical board using the DAC7563SDGSR?

The median is 60 × 78 mm, and 0% are two-layer designs.

What is the most popular open source board using the DAC7563SDGSR?

By GitHub stars, Mixed Signal Board by AhmedAbo-Eita, with 3 stars.

Can I simulate one of these boards using the DAC7563SDGSR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part