Totem compass
ljagiello·totem-compass·hardware/totem-v3.5-reference/schematic/totem.kicad_pcb
About the Totem compass PCB
Totem compass is an open source ESP32 PCB design by ljagiello, published on GitHub under the Apache-2.0 license. It is a 4-layer board measuring 45.8 × 46.4 mm, with 137 components from 37 distinct parts.
Its main chip is the ESP32-WROOM-32E-N4, from the ESP32 family. Other key parts include the MAX-M10S-00B, TP4056-42-ESOP8, AP2112K-3.3TRG1, LSM6DSV16XTR and LIS2MDLTR. By type, the board carries 72 diodes, 28 resistors, 20 capacitors, 6 ICs, 5 transistors and 3 connectors.
It belongs with the iot & wireless, power & battery and rf & radio designs in this gallery.
From the project
Independent reverse-engineering documentation of the Totem Compass ESP32 + MicroPython firmware (v5.0.2): image/memory map, the 96 frozen modules, the 2.4 GHz protocols (BLE, ESP-NOW mesh, WiFi OTA), and a custom-client reference.
A working circuit built from the parts identified on a Totem v3.5, with the values chosen by calculation and checked in ngspice.
This is a reconstruction, not a recovery. The parts and the MCU pin assignments are established — the parts off the board, the pins out of the firmware, both cited in the hardware page. Everything else here is designed to satisfy those facts, not traced from the PCB. Resistor values, the regulator topology, the LED supply arrangement: all chosen here. Where a value is derived from something the firmware does, the derivation is shown, and that is the strongest claim…
Main components on the Totem compass
Totem compass bill of materials (BOM)
137 components, 37 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32E-N4 ESP32-WROOM-32E Espressif | ESP32-WROOM-32E | U1 |
| 1 | MAX-M10S-00B MAX-M10S u-blox | ublox_MAX | U2 |
| 1 | TP4056-42-ESOP8 NanJing Top Power | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U3 |
| 1 | AP2112K-3.3TRG1 AP2112K-3.3 Diodes Inc. | SOT-23-5 | U4 |
| 1 | LSM6DSV16XTR LSM6DSV16X STMicroelectronics | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U5 |
| 1 | LIS2MDLTR LIS2MDL STMicroelectronics | LGA-12_2x2mm_P0.5mm | U6 |
| 2 | AO3401A Alpha & Omega | SOT-23 | Q1, Q4 |
| 3 | 2N7002 Nexperia | SOT-23 | Q2, Q3, Q5 |
| 1 | USB4135-GF-A GCT | USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_Horizontal | J1 |
| 1 | LiPo 1000mAh JST | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 1 | u.FL Hirose | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J3 |
| 1 | CMC-4013-2-SMT electret Same Sky (CUI Devices) | CUI_CMC-4013-SMT_RingGap | MK1 |
| 1 | power C&K | SW_SPST_PTS645Sx43SMTR92 | SW1 |
| 1 | SOS C&K | SW_SPST_PTS645Sx43SMTR92 | SW2 |
| 1 | 1N4148W-7-F 1N4148W Diodes Inc. | D_SOD-123 | D1 |
| 1 | BAT54W-7-F BAT54W Diodes Inc. | SOT-323_SC-70 | D2 |
| 2 | LTST-C191KRKT red Lite-On | LED_0603_1608Metric | D3, D4 |
| 1 | LTST-C191KGKT green Lite-On | LED_0603_1608Metric | D5 |
| 67 | XL-1515RGBC-WS2812B XINGLIGHT | LED_XL-1515RGBC-WS2812B | D100, D101, D102, D103, D104, D105, D106, D107 +59 |
| 7 | CL10B104KB8NNNC 100n Samsung | C_0603_1608Metric | C1, C4, C6, C7, C12, C19, C21 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CL10A105KB8NNNC 1u Samsung | C_0603_1608Metric | C2, C18 |
| 10 | CL21A106KAYNNNE 10u Samsung | C_0805_2012Metric | C3, C5, C10, C11, C13, C14, C15, C16 +2 |
| 1 | CL10B224KB8NNNC 220n Samsung | C_0603_1608Metric | C8 |
| 1 | RT0603BRD07113KL 113k Yageo | R_0603_1608Metric | R1 |
| 1 | RT0603BRD07102KL 102k Yageo | R_0603_1608Metric | R2 |
| 7 | RC0603FR-07100KL 100k Yageo | R_0603_1608Metric | R3, R9, R10, R14, R18, R24, R25 |
| 1 | RC0603FR-07150KL 150k Yageo | R_0603_1608Metric | R4 |
| 1 | RC0603FR-072KL 2k Yageo | R_0603_1608Metric | R5 |
| 1 | RC0603FR-07330RL 330 Yageo | R_0603_1608Metric | R6 |
| 2 | RC0603FR-074K7L 4.7k Yageo | R_0603_1608Metric | R7, R8 |
| 2 | RC0603FR-0733RL 33 Yageo | R_0603_1608Metric | R11, R12 |
| 5 | RC0603FR-0710KL 10k Yageo | R_0603_1608Metric | R13, R17, R19, R22, R26 |
| 1 | RC0603FR-0710ML 10M Yageo | R_0603_1608Metric | R15 |
| 1 | RC0603FR-071ML 1M Yageo | R_0603_1608Metric | R16 |
| 2 | RC0603FR-075K1L 5.1k Yageo | R_0603_1608Metric | R20, R21 |
| 1 | RC0603FR-072K2L 2.2k Yageo | R_0603_1608Metric | R23 |
| 2 | RC0603FR-071KL 1k Yageo | R_0603_1608Metric | R27, R28 |
Totem compass design files
The KiCad project lives in the ljagiello/totem-compass repository on GitHub; these links point at the commit this page was built from.
Totem compass: common questions
What microcontroller does the Totem compass use?
The Totem compass is built around the ESP32-WROOM-32E-N4, from the ESP32 family.
How big is the Totem compass PCB?
The Totem compass measures 45.8 × 46.4 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Totem compass?
137 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Totem compass design files?
From the ljagiello/totem-compass repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Totem compass design in my own project?
Yes, under the terms of its Apache-2.0 license, which ljagiello chose for the repository.
Can I test firmware for the Totem compass without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k