11 open source boards using the LIS2MDLTR
Real designs built with the LIS2MDLTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Watch-DevKit-HW
ZSWatch
100 × 70 mm100 parts4LGPL-3.0187Watch-HW
ZSWatch
41 × 37.5 mm62 parts4LGPL-3.05AVR/Arduino
EUPLA CONE CORE
PineConeMechatronics
76.2 × 54 mm95 parts2LCERN-OHL-P-2.01ESP32
Lichtstab
kilimnik
100.5 × 87.7 mm139 parts4LNo license0ESP32
Totem compass
ljagiello
45.8 × 46.4 mm137 parts4LApache-2.00STM32
X-Watch
Han-ZenX
36 × 36 mm118 parts2LMIT0STM32
Gps tracker
candykingdom
84.9 × 74.8 mm92 parts4LApache-2.00RP2040/RP2350
Knuckles imu lsm6-lis2-rp2354a
jakeread
20 × 21.5 mm43 parts4LCERN-OHL-S-2.00- schematic only · 84 parts
Daedalus v0
gregtidanian
84 partsNo license0 02 05 magnetometer LIS2MDLTR I2C
nyuad-space
22 × 22 mm12 parts2LNo license1ZSWatch
yuxiangcheng2002
40.9 × 38 mm62 parts4LNo license0
How designs wire the LIS2MDLTR
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the LIS2MDLTR connects to, and the resistors, capacitors and other passives placed on it.
- The C1 pin has a capacitor to GND on 10 of 10 designs, most often 220 nF (then 100 nF).
- The VDD pin has a decoupling capacitor on 9 of 10 designs, most often 100 nF (then 10 µF).
- The VDD_IO pin has a decoupling capacitor on 9 of 10 designs, most often 100 nF (then 10 µF).
- The SCL/SPC pin has a pull-up to 1.8V on 7 of 10 designs, most often 4.7 kΩ (then 1.8 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SCL/SPCpin 1 | Connected to: BMI270 30%, BMP581 30%, a connector 30% |
|
| NCpin 2, 11, 12 | Connected to: Not connected 80% · GND 20% | — |
| CSpin 3 | Connected to: 1.8V 60% · a signal 40% | — |
| SDA/SDI/SDOpin 4 | Connected to: BMI270 30%, BMP581 30%, a connector 30% |
|
| C1pin 5 | Connected to: Signal 100% |
|
| GNDpin 6, 8 | Connected to: GND 100% | — |
| VDDpin 9 | Connected to: 3.3V 90% |
|
| VDD_IOpin 10 | Connected to: 3.3V 100% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Watch-DevKit-HW by ZSWatch, Watch-HW by ZSWatch, 02 05 magnetometer LIS2MDLTR I2C by nyuad-space and EUPLA CONE CORE by PineConeMechatronics.
The LIS2MDLTR in open source designs
The gallery holds 11 open source boards using the LIS2MDLTR from 11 GitHub repositories; a typical one measures about 43.4 × 42.2 mm and carries around 92 components.
70% use four copper layers or more, and 64% carry an open source license.
The most starred is Watch-DevKit-HW by ZSWatch.
Parts used alongside the LIS2MDLTR
Microcontrollers on boards using the LIS2MDLTR
What boards using the LIS2MDLTR are built for
LIS2MDLTR: common questions
Where can I find a LIS2MDLTR reference design?
Each of the 11 boards on this page is a real design using the LIS2MDLTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LIS2MDLTR C1 pin connected?
The C1 pin has a capacitor to GND on 10 of 10 designs, most often 220 nF (then 100 nF). Counted from the KiCad layouts of 10 open source designs using the LIS2MDLTR.
What decoupling capacitors do designs use on the LIS2MDLTR VDD pin?
The VDD pin has a decoupling capacitor on 9 of 10 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 10 open source designs using the LIS2MDLTR.
What decoupling capacitors do designs use on the LIS2MDLTR VDD_IO pin?
The VDD_IO pin has a decoupling capacitor on 9 of 10 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 10 open source designs using the LIS2MDLTR.
What parts are used alongside the LIS2MDLTR?
The BMI270, BMP581, DRV2603RUNT, FAN5622SX and APDS-9306-065 appear in the most repositories here.
Which microcontrollers do boards using the LIS2MDLTR use?
Most are built on ESP32 (2), STM32 (2), AVR/Arduino (1) and RP2040/RP2350 (1).
How big is a typical board using the LIS2MDLTR?
The median is 43.4 × 42.2 mm, and 30% are two-layer designs.
What is the most popular open source board using the LIS2MDLTR?
By GitHub stars, Watch-DevKit-HW by ZSWatch, with 187 stars.
Can I simulate one of these boards using the LIS2MDLTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.