HT 485
lucafaccin·HT_485
About the HT 485 PCB
HT 485 is an open source ESP32 PCB design by lucafaccin, published on GitHub. It is a 2-layer board measuring 82 × 72.2 mm, with 115 components from 50 distinct parts.
Its main chip is the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family. Other key parts include the L7805, TL082, LD1086DT33TR, LM2576S-12/NOPB and TL431DBZ. By type, the board carries 47 resistors, 22 capacitors, 16 diodes, 10 transistors, 8 ICs and 6 connectors.
It belongs with the sensors designs in this gallery.
From the project
Modbus RTU H/T Sensor
Main components on the HT 485
HT 485 bill of materials (BOM)
115 components, 50 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L7805 | TO-252-3_TabPin2 | U1 |
| 1 | TL082 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U2 |
| 1 | LD1086DT33TR | TO-252-3_TabPin2 | U3 |
| 1 | ESP32-S3-WROOM-1U-N16R8 | ESP32-S3-WROOM-1 | U4 |
| 1 | LM2576S-12/NOPB | TO-263-5_TabPin3 | U5 |
| 1 | TL431DBZ | SOT-23 | U7 |
| 2 | MAX485 | SOIC-8_3.9x4.9mm_P1.27mm | U8, U9 |
| 4 | BC817 | SOT-23 | Q1, Q2, Q3, Q4 |
| 6 | SI2302CDS Si2302CDS | SOT-23 | Q5, Q6, Q7, Q8, Q9, Q10 |
| 2 | 485_1 | TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J1, J2 |
| 1 | PT1000 | TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J3 |
| 1 | H/T Sensor | JST_PH_S6B-PH-SM4-TB_1x06-1MP_P2.00mm_Horizontal | J4 |
| 1 | PRG | PinSocket_2x03_P2.54mm_Vertical | J5 |
| 1 | PWR | TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J6 |
| 1 | T | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | T. | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3 |
| 1 | 10K 1% 20g -3296Y-1-103LF | Potentiometer_Bourns_3296Y_Vertical | RV1 |
| 1 | 485_PWR_1 | PinHeader_1x03_P2.54mm_Vertical | SW1 |
| 1 | 485_PWR_2 | PinHeader_1x03_P2.54mm_Vertical | SW2 |
| 1 | VS-30BQ060HM3/9AT | D_SMB-SMC_Universal_Handsoldering | D1 |
Show 30 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | BAR43SFILM | SOT-23 | D2, D10, D11, D12, D13, D14 |
| 1 | PWR | LED_0805_2012Metric | D3 |
| 5 | 1N4148WS | D_SOD-323 | D4, D5, D6, D7, D8 |
| 1 | BAV99 | SOT-23 | D9 |
| 1 | VSSAF522-M3/H | D_SMA-SMB_Universal_Handsoldering | D15 |
| 1 | 3.9V / 1W | D_SOD-128 | D16 |
| 1 | MSS1210-104KED -100uH | MSS1210-104KED | L1 |
| 1 | 1UF/16V 1uF/16V | C_0805_2012Metric | C3 |
| 9 | 100NF 100nF | C_0805_2012Metric | C4, C8, C11, C12, C13, C14, C20, C24 +1 |
| 1 | 100UF/75V 100uF/75V | CP_Elec_8x10.5 | C5 |
| 2 | 10uF / 25V | C_0805_2012Metric | C6, C7 |
| 1 | 10UF 10uF | C_0805_2012Metric | C9 |
| 1 | 1NF/25V 1nF/25V | C_0805_2012Metric | C10 |
| 1 | 1000UF/25V 1000uF/25V | CP_Elec_10x10.5 | C15 |
| 1 | 1NF 1nF | C_0805_2012Metric | C16 |
| 2 | 100UF/25V 100uF/25V | CP_Elec_6.3x7.7 | C18, C19 |
| 1 | 1uF / 25V | C_0805_2012Metric | C21 |
| 2 | 4.7UF 4.7uF | C_0805_2012Metric | C22, C23 |
| 11 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R5, R7, R8, R11, R14, R19, R24 +3 |
| 2 | 1K 1% | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 1 | 5K6 1% | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 8 | 10R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R16, R21, R23, R31, R38, R39, R40 |
| 1 | 1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 1 | 100R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 560R 1% | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
| 4 | 10K 1% | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R15, R18, R25 |
| 1 | 33K 1% | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17 |
| 3 | 0R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20, R28, R29 |
| 2 | 120R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22, R47 |
| 12 | 4K7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R32, R33, R34, R35, R36, R37, R41, R42 +4 |
HT 485 design files
The KiCad project lives in the lucafaccin/HT_485 repository on GitHub; these links point at the commit this page was built from.
- LayoutHT_485.kicad_pcb
- SchematicHT_485.kicad_sch
- BOMproduction/v1.0.1.0/bom.csv
HT 485: common questions
What microcontroller does the HT 485 use?
The HT 485 is built around the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family.
How big is the HT 485 PCB?
The HT 485 measures 82 × 72.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the HT 485?
115 components, from 50 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the HT 485 design files?
From the lucafaccin/HT_485 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the HT 485 design in my own project?
The repository has no license, so all rights stay with lucafaccin. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the HT 485 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in HT_485
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k