14 open source boards using the LD1086DT33TR
Real designs built with the LD1086DT33TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Dual CPU Base Board
Twisted-Fields
94.4 × 72.8 mm247 parts4LCustom license419ESP8266
Tesla-Front-Drive-Unit
damienmaguire
190.5 × 176.6 mm196 parts4LNo license59ESP32
ClimateSprinklerController
kbx81
217 × 108 mm189 parts2LNo license55STM32
Fwrtss
ynsta
70 × 70 mm101 parts2LNo license7ESP32
Dancing forest
sequoia-hope
322.5 × 183.5 mm216 parts4LCustom license1PIC
TurnoutBoss
JimKueneman
164.5 × 86.8 mm207 parts2LNo license1ESP32
ADVdash 5"
ADVecu
150.6 × 89.9 mm148 parts4LNo license0STM32
Autodrone V2
jpwolfe9912
54.8 × 39.2 mm141 parts6LNo license0STM32
AutonomisRobotArobs
andrei-morar
100 × 80 mm139 parts2LNo license0ESP32
HT 485
lucafaccin
82 × 72.2 mm115 parts2LNo license0Mixer
arneman44
110.5 × 114.3 mm99 parts2LNo license0RP2040/RP2350
Driver Module
Twisted-Fields
68.8 × 36 mm107 parts4LCustom license419ESP32
Dancing forest version 1
sequoia-hope
147.9 × 147.9 mm162 parts4LCustom license1RP2040/RP2350
RP2040 Debugger
Twisted-Fields
57 × 47.5 mm60 parts4LCustom license419
How designs wire the LD1086DT33TR
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the LD1086DT33TR connects to, and the resistors, capacitors and other passives placed on it.
- The OUT pin is tied to 3.3V on 10 of 11 designs.
- The IN pin is tied to 5V on 7 of 11 designs (a signal on 4).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| ADJ/GNDpin 1 | Connected to: GND 91% | — |
| OUTpin 2 | Connected to: 3.3V 91% | — |
| INpin 3 | Connected to: 5V 64% · a signal 36% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Driver Module by Twisted-Fields, Tesla-Front-Drive-Unit by damienmaguire, ClimateSprinklerController by kbx81 and Fwrtss by ynsta.
The LD1086DT33TR in open source designs
The gallery holds 14 open source boards using the LD1086DT33TR from 11 GitHub repositories; a typical one measures about 105.2 × 83.4 mm and carries around 145 components.
57% use four copper layers or more, and 0% carry an open source license.
The most starred is Dual CPU Base Board by Twisted-Fields.
Parts used alongside the LD1086DT33TR
Microcontrollers on boards using the LD1086DT33TR
What boards using the LD1086DT33TR are built for
LD1086DT33TR: common questions
Where can I find a LD1086DT33TR reference design?
Each of the 14 boards on this page is a real design using the LD1086DT33TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LD1086DT33TR OUT pin connected?
The OUT pin is tied to 3.3V on 10 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the LD1086DT33TR.
How is the LD1086DT33TR IN pin connected?
The IN pin is tied to 5V on 7 of 11 designs (a signal on 4). Counted from the KiCad layouts of 11 open source designs using the LD1086DT33TR.
What parts are used alongside the LD1086DT33TR?
The BMP280, SN65HVD230, TXS0101DCKR and USBLC6-2P6 appear in the most repositories here.
Which microcontrollers do boards using the LD1086DT33TR use?
Most are built on ESP32 (5), RP2040/RP2350 (3), STM32 (3) and ESP8266 (1).
How big is a typical board using the LD1086DT33TR?
The median is 105.2 × 83.4 mm, and 43% are two-layer designs.
What is the most popular open source board using the LD1086DT33TR?
By GitHub stars, Dual CPU Base Board by Twisted-Fields, with 419 stars.
Can I simulate one of these boards using the LD1086DT33TR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.