LucaudioESP32
lucococo·LucaudioESP32·Hardware/LucaudioESP32_V2_1/LucaudioESP32_V2_1.kicad_pcb
About the LucaudioESP32 PCB
LucaudioESP32 is an open source ESP32 PCB design by lucococo, published on GitHub. It is a 2-layer board measuring 92.4 × 70 mm, with 91 components from 41 distinct parts.
Its main chip is the ESP32-WROVER-E, from the ESP32 family. Other key parts include the LP5907MFX-3.3, PCM5102, TLV1117-33, USBLC6-2SC6 and CH340N. By type, the board carries 37 capacitors, 22 resistors, 8 ICs, 8 connectors, 5 diodes and 4 switches.
It belongs with the audio and iot & wireless designs in this gallery, and the repository also holds 3 earlier revisions of it.
From the project
ESP32 based board running SqueezeliteESP32 for audio streaming
Project inspired by sonocotta ESP audio docks.
I wanted a solution for wireless audio multiroom synchronized players, and the best I found was projects using squeezelite-esp32.
I did my own board because firstly I wanted to improve my cad skills, and also because I like bringing my own personnal touch. Project is still in development, I'm adding new features on my pcb later on
Main components on the LucaudioESP32
LucaudioESP32 bill of materials (BOM)
91 components, 41 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROVER-E | ESP32-WROVER-E | U1 |
| 3 | LP5907MFX-3.3 | SOT-23-5 | U2, U3, U5 |
| 1 | PCM5102 | TSSOP-20_4.4x6.5mm_P0.65mm | U4 |
| 1 | TLV1117-33 | SOT-223-3_TabPin2 | U6 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U7 |
| 1 | CH340N | SOP-8_3.9x4.9mm_P1.27mm | U8 |
| 2 | BC847 | SOT-23 | Q1, Q2 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Horizontal | J1 |
| 1 | CON_RCA | 2x RCA | J2 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J3 |
| 1 | Conn_01x04_Socket | PinSocket_1x04_P2.54mm_Vertical | J4 |
| 1 | Conn_01x05_Socket | PinSocket_1x05_P2.54mm_Vertical | J5 |
| 1 | Conn_01x05_Pin | PinHeader_1x05_P2.54mm_Horizontal | J6 |
| 1 | USB_B_Micro | USB_Micro-B_Molex-105017-0001 | J8 |
| 1 | AudioJack3 | JST_3p_audio | J9 |
| 1 | 300mA | Fuse_0805_2012Metric | F1 |
| 2 | SW_Omron_B3FS | SW_SPST_Omron_B3FS-100xP | SW1, SW2 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW3 |
| 1 | SW_SPDT | Slide_angular_SPDT | SW4 |
| 1 | AMP | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | LED1 |
Show 21 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | POWER | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | LED2 |
| 1 | ~ | OLED_128_32 | OLED1 |
| 3 | 1N5819WS | D_SOD-323_HandSoldering | D1, D2, D3 |
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | 5V2 | D_SMA | D5 |
| 1 | 100u | L_Sunlord_SWPA4018S | L1 |
| 1 | 4.7uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 5 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C7, C16, C18, C26 |
| 9 | 100nF | C_0805_2012Metric | C3, C4, C13, C15, C19, C21, C23, C28 +1 |
| 3 | 10uF | CP_Elec_5x4.5 | C5, C6, C8 |
| 1 | 100uF | CP_Elec_5x4.5 | C9 |
| 6 | 1uF | C_0805_2012Metric | C10, C11, C12, C20, C22, C24 |
| 2 | 10uF | C_0805_2012Metric | C14, C27 |
| 4 | 2.2uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17, C25, C33, C34 |
| 2 | 2.2uF | CP_EIA-3216-10_Kemet-I | C29, C36 |
| 2 | 470nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C31, C32 |
| 2 | 1.5nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C35, C37 |
| 11 | 470 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R7, R10, R13, R15 +3 |
| 5 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R12, R14, R16 |
| 4 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R19, R20, R21 |
| 2 | 5.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R11 |
LucaudioESP32 design files
The KiCad project lives in the lucococo/LucaudioESP32 repository on GitHub; these links point at the commit this page was built from.
LucaudioESP32: common questions
What microcontroller does the LucaudioESP32 use?
The LucaudioESP32 is built around the ESP32-WROVER-E, from the ESP32 family.
How big is the LucaudioESP32 PCB?
The LucaudioESP32 measures 92.4 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LucaudioESP32?
91 components, from 41 distinct parts. The full bill of materials is listed on this page.
Where can I download the LucaudioESP32 design files?
From the lucococo/LucaudioESP32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the LucaudioESP32 design in my own project?
The repository has no license, so all rights stay with lucococo. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the LucaudioESP32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Earlier revisions in the repo: LucaudioESP32_V2_0, LucaudioESP32_V1_2_0, LucaudioESP32_V1_1_0
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k