15 open source boards using the PCM5102
Real designs built with the PCM5102, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Sony scopeman
lucysrausch
53.5 × 101.8 mm135 parts2LNo license69Raspberry Pi
Minidexed
handeyeco
130.8 × 81.5 mm47 parts2LNo license23ESP32 IEM RX
dlmuschamp
90.5 × 55.3 mm63 parts2LNo license4RP2040/RP2350
Project athena
reading-hackspace
100 × 100 mm77 parts2LNo license35V PCM5102 interface for Raspberry PI (PLL Operation)
6r1d
65.6 × 34.1 mm38 parts2LMIT2FPGA
PCB
TDT4295-2019-groupA
135.2 × 94.2 mm154 parts4LNo license0ESP32
LucaudioESP32
lucococo
92.4 × 70 mm91 parts2LNo license0Mt32-cm3plus
peon374
76.2 × 104.1 mm60 parts2LNo license0BalancedSurroundOut
samo4
45 × 62 mm58 parts2LNo license0Raspberry Pi
Osga shield
kurogedelic
100 × 100 mm15 parts2LNo license0RP2040/RP2350
RP2040 DSP Modular
DMME-NL
166.2 × 92.6 mm100 parts2LGPL-3.072AudioExtendBoard
lithiumice
30.8 × 46.9 mm27 parts2LNo license92PCM5102A
risejohan
32.5 × 25.8 mm25 parts2LNo license17RP2040/RP2350
RLab Keyboard
RADARC
100 × 100 mm66 parts2LNo license0AVR/Arduino
T41-main board-V012
K0RGI
100 × 100 mm95 parts4LGPL-3.01
How designs wire the PCM5102
Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the PCM5102 connects to, and the resistors, capacitors and other passives placed on it.
- The CPVDD pin has a decoupling capacitor on 13 of 15 designs, most often 100 nF (then 10 µF).
- The CAPP pin has a series capacitor on 13 of 15 designs, most often 2.2 µF.
- The CAPM pin has a series capacitor on 13 of 15 designs, most often 2.2 µF.
- The VNEG pin has a capacitor to GND on 12 of 15 designs, most often 2.2 µF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CPVDDpin 1 | Connected to: 3.3V 87% |
|
| CAPPpin 2 | Connected to: Signal 87% |
|
| CPGNDpin 3 | Connected to: GND 80% · a signal 20% | — |
| CAPMpin 4 | Connected to: Signal 100% |
|
| VNEGpin 5 | Connected to: Signal 100% |
|
| OUTLpin 6 | Connected to: Signal 87% |
|
| OUTRpin 7 | Connected to: Signal 87% |
|
| AVDDpin 8 | Connected to: 3.3V 67% · a signal 20% |
|
| AGNDpin 9 | Connected to: GND 80% | — |
| DEMPpin 10 | Connected to: GND 60% · a signal 27% | — |
| BCKpin 13 | Connected to: The microcontroller 33% |
|
| LRCKpin 15 | Connected to: The microcontroller 33% |
|
| FMTpin 16 | Connected to: GND 77% · a signal 23% | — |
| XSMTpin 17 | Connected to: Signal 92% |
|
| LDOOpin 18 | Connected to: Signal 100% |
|
| DGNDpin 19 | Connected to: GND 92% | — |
| DVDDpin 20 | Connected to: 3.3V 92% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include AudioExtendBoard by lithiumice, RP2040 DSP Modular by DMME-NL, Sony scopeman by lucysrausch and Minidexed pcb by handeyeco.
The PCM5102 in open source designs
The gallery holds 15 open source boards using the PCM5102 from 15 GitHub repositories; a typical one measures about 92.4 × 92.6 mm and carries around 63 components.
87% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is AudioExtendBoard by lithiumice.
Parts used alongside the PCM5102
Microcontrollers on boards using the PCM5102
What boards using the PCM5102 are built for
PCM5102: common questions
Where can I find a PCM5102 reference design?
Each of the 15 boards on this page is a real design using the PCM5102. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the PCM5102 CPVDD pin?
The CPVDD pin has a decoupling capacitor on 13 of 15 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 15 open source designs using the PCM5102.
How is the PCM5102 CAPP pin connected?
The CAPP pin has a series capacitor on 13 of 15 designs, most often 2.2 µF. Counted from the KiCad layouts of 15 open source designs using the PCM5102.
How is the PCM5102 CAPM pin connected?
The CAPM pin has a series capacitor on 13 of 15 designs, most often 2.2 µF. Counted from the KiCad layouts of 15 open source designs using the PCM5102.
What parts are used alongside the PCM5102?
The H11L1, LM386, LP5907MFX-3.3, MPR121QR2 and RaspberryPi_Pico appear in the most repositories here.
Which microcontrollers do boards using the PCM5102 use?
Most are built on RP2040/RP2350 (3), ESP32 (2), Raspberry Pi (2) and AVR/Arduino (1).
How big is a typical board using the PCM5102?
The median is 92.4 × 92.6 mm, and 87% are two-layer designs.
What is the most popular open source board using the PCM5102?
By GitHub stars, AudioExtendBoard by lithiumice, with 92 stars.
Can I simulate one of these boards using the PCM5102 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.