Amiga-USB-C-PD-Power-Supply

mamejay·Amiga-USB-C-PD-Power-Supply·hw/Amiga USB-C PD Power Supply.kicad_pcb

Amiga-USB-C-PD-Power-Supply PCB layout, top view — open source board by mamejay

About the Amiga-USB-C-PD-Power-Supply PCB

Amiga-USB-C-PD-Power-Supply is an open source PCB design by mamejay, published on GitHub under the Custom license license. It is a 2-layer board measuring 76 × 32 mm, with 68 components from 33 distinct parts.

Other key parts include the CH224A, SY8205FCC, TPS259470ARPWR and LMR51430XDDCR. By type, the board carries 28 capacitors, 21 resistors, 8 diodes, 5 ICs, 3 inductors and 2 connectors.

It belongs with the power & battery and retro computing designs in this gallery.

From the project

USB-C PD (15 V) power supply for Amiga 500/600/1200: +5 V 5 A (eFuse), +12 V, -12 V

A compact power supply that runs a Commodore Amiga 500 / 600 / 1200 from a USB-C PD charger. It asks the charger for 15 V and makes the three Amiga rails on board:

Input power budget is 45 W (15 V × 3 A), e.g. 5 V 4.5 A + 12 V 1 A + −12 V 0.2 A ≈ 37 W out. The converters only start once the charger has agreed 15 V (CH224A power-good) and VBUS is above ~11.5 V, so a 5 V-only or non-PD source never powers the Amiga.

Main components on the Amiga-USB-C-PD-Power-Supply

Amiga-USB-C-PD-Power-Supply bill of materials (BOM)

68 components, 33 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CH224A
U1
1
SY8205FCC
U2
1
TPS259470ARPWR
U3
2
LMR51430XDDCR
U4, U5
1
2N7002
Q1
1
C165948
USB-C (power in)
J1
1
AMIGA OUT
J2
1
SMF5.0A
D1
3
C2297
GREEN
D2, D5, D8
1
C84256
RED
D3
2
SMF13A
D4, D7
1
B5819W
D6
1
4.7UH
4.7uH
L1
2
12UH
12uH
L2, L3
2
1UF/50V
1uF/50V
C1, C28
4
10UF/50V
10uF/50V
C2, C3, C20, C21
7
100NF/50V
100nF/50V
C4, C5, C15, C16, C22, C23, C27
11
22UF/25V
22uF/25V
C6, C7, C8, C9, C12, C17, C18, C19 +3
1
100PF
100pF
C10
1
2.2NF
2.2nF
C11
Show 13 more
QtyPartRefs
2
10UF/25V
10uF/25V
C13, C14
1
56K
56k
R1
7
100K
100k
R2, R3, R8, R10, R15, R18, R20
1
12K
12k
R4
1
75K
75k
R5
1
10K
10k
R6
1
47K
47k
R9
1
27K
27k
R11
1
620R
R12
2
1k
R13, R14
2
5.1K
5.1k
R16, R21
2
4.7K
4.7k
R17, R22
1
20K
20k
R19

Amiga-USB-C-PD-Power-Supply design files

The KiCad project lives in the mamejay/Amiga-USB-C-PD-Power-Supply repository on GitHub; these links point at the commit this page was built from.

Amiga-USB-C-PD-Power-Supply: common questions

How big is the Amiga-USB-C-PD-Power-Supply PCB?

The Amiga-USB-C-PD-Power-Supply measures 76 × 32 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Amiga-USB-C-PD-Power-Supply?

68 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Amiga-USB-C-PD-Power-Supply design files?

From the mamejay/Amiga-USB-C-PD-Power-Supply repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Amiga-USB-C-PD-Power-Supply design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Similar boards