5 open source boards using the SY8205FCC

Real designs built with the SY8205FCC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the SY8205FCC

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SY8205FCC connects to, and the resistors, capacitors and other passives placed on it.

  • The BS_1 pin has a series capacitor on 5 of 5 designs, most often 100 nF.
  • The LX_2 pin has a inductor on 5 of 5 designs, most often 3.3 µH (then 6.8 µH).
  • The LX_2 pin has a series capacitor on 5 of 5 designs, most often 100 nF.
  • The SS_4 pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 22 nF).
BS_1pin 1Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (5)
LX_2pin 2Connected to: Signal 100%
  • Inductor on 100% · 3.3 µH (1), 6.8 µH (1), 2.2 µH (1)
  • Series capacitor on 100% · 100 nF (5)
EN_3pin 3Connected to: Signal 80% · VIN 20%
  • Pull-up to 12V on 80% · 100 kΩ (4)
SS_4pin 4Connected to: Signal 100%
  • Capacitor to GND on 100% · 100 nF (4), 22 nF (1)
FB_5pin 5Connected to: Signal 80% · 5V 20%
  • Resistor to GND on 80% · 10 kΩ (3), 3 kΩ (1)
  • Pull-up to 5V on 60% · 22 kΩ (1), 75 kΩ (1), 45.3 kΩ (1)
  • Capacitor to the supply on 40% · 470 pF (1), 100 pF (1)
VCC_6pin 6Connected to: Signal 80% · VCC5 20%
  • Capacitor to GND on 100% · 1 µF (5)
VIN_7pin 7Connected to: 12V 80% · a signal 20%
  • Decoupling capacitor on 80% · 100 nF (3), 10 µF (2), 22 µF (1)
VIN_8pin 8Connected to: 12V 80% · a signal 20%
  • Decoupling capacitor on 80% · 100 nF (3), 10 µF (2), 22 µF (1)
GND_9pin 9Connected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CMAIN PCB by Arrow-air, X1Plus Expander X1P-002 by jwise, Esp32-power actuator board by 2ah33d and Amiga-USB-C-PD-Power-Supply by mamejay.

The SY8205FCC in open source designs

The gallery holds 5 open source boards using the SY8205FCC from 5 GitHub repositories; a typical one measures about 145 × 58 mm and carries around 134 components.

60% use four copper layers or more, and 20% carry an open source license.

The most starred is CMAIN PCB by Arrow-air.

Parts used alongside the SY8205FCC

Microcontrollers on boards using the SY8205FCC

What boards using the SY8205FCC are built for

SY8205FCC: common questions

Where can I find a SY8205FCC reference design?

Each of the 5 boards on this page is a real design using the SY8205FCC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the SY8205FCC BS_1 pin connected?

The BS_1 pin has a series capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the SY8205FCC.

How is the SY8205FCC LX_2 pin connected?

The LX_2 pin has a inductor on 5 of 5 designs, most often 3.3 µH (then 6.8 µH). Counted from the KiCad layouts of 5 open source designs using the SY8205FCC.

How is the SY8205FCC SS_4 pin connected?

The SS_4 pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 22 nF). Counted from the KiCad layouts of 5 open source designs using the SY8205FCC.

Which microcontrollers do boards using the SY8205FCC use?

Most are built on RP2040/RP2350 (2) and ESP32 (1).

How big is a typical board using the SY8205FCC?

The median is 145 × 58 mm, and 40% are two-layer designs.

What is the most popular open source board using the SY8205FCC?

By GitHub stars, CMAIN PCB by Arrow-air, with 175 stars.

Can I simulate one of these boards using the SY8205FCC before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part