15 open source boards using the LMR51430XDDCR

Real designs built with the LMR51430XDDCR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the LMR51430XDDCR

Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the LMR51430XDDCR connects to, and the resistors, capacitors and other passives placed on it.

  • The SW_2 pin has a series capacitor on 12 of 12 designs, most often 100 nF.
  • The SW_2 pin has a inductor on 12 of 12 designs, most often 5.6 µH (then 12 µH).
  • The CB_6 pin has a series capacitor on 12 of 12 designs, most often 100 nF.
  • The VIN_3 pin has a decoupling capacitor on 11 of 12 designs, most often 100 nF (then 10 µF).
GND_1pin 1Connected to: GND 100%
SW_2pin 2Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (12)
  • Inductor on 100% · 5.6 µH (4), 12 µH (2), 22 µH (2)
VIN_3pin 3Connected to: BATT 83% · a signal 17%
  • Decoupling capacitor on 92% · 100 nF (9), 10 µF (7), 4.7 µF (3)
FB_4pin 4Connected to: Signal 92%
  • Resistor to GND on 92% · 22.1 kΩ (4), 22 kΩ (2), 5.1 kΩ (1)
  • Pull-up to 3.3V on 75% · 100 kΩ (8)
EN_5pin 5Connected to: BATT 67% · a signal 33%
CB_6pin 6Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (12)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include GS Mainboard by Queens-Rocket-Engineering-Team, Roamer bot by kylestew, QRET 25-26 SRAD Hybrid Power Module by Queens-Rocket-Engineering-Team and QRET 23-24 SRAD Power Module by Queens-Rocket-Engineering-Team.

The LMR51430XDDCR in open source designs

The gallery holds 15 open source boards using the LMR51430XDDCR from 12 GitHub repositories; a typical one measures about 69.5 × 68 mm and carries around 97 components.

73% use four copper layers or more, and 20% carry an open source license.

The most starred is GS Mainboard by Queens-Rocket-Engineering-Team.

Microcontrollers on boards using the LMR51430XDDCR

LMR51430XDDCR: common questions

Where can I find a LMR51430XDDCR reference design?

Each of the 15 boards on this page is a real design using the LMR51430XDDCR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LMR51430XDDCR SW_2 pin connected?

The SW_2 pin has a series capacitor on 12 of 12 designs, most often 100 nF. Counted from the KiCad layouts of 12 open source designs using the LMR51430XDDCR.

How is the LMR51430XDDCR CB_6 pin connected?

The CB_6 pin has a series capacitor on 12 of 12 designs, most often 100 nF. Counted from the KiCad layouts of 12 open source designs using the LMR51430XDDCR.

What decoupling capacitors do designs use on the LMR51430XDDCR VIN_3 pin?

The VIN_3 pin has a decoupling capacitor on 11 of 12 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 12 open source designs using the LMR51430XDDCR.

What parts are used alongside the LMR51430XDDCR?

The USBLC6-2SC6, ACS37041KLHBLT-010B3, AMS1117-3.3, LM66100DCKR and ICM-45686 appear in the most repositories here.

Which microcontrollers do boards using the LMR51430XDDCR use?

Most are built on STM32 (11), ESP32 (2) and AVR/Arduino (1).

How big is a typical board using the LMR51430XDDCR?

The median is 69.5 × 68 mm, and 27% are two-layer designs.

What is the most popular open source board using the LMR51430XDDCR?

By GitHub stars, GS Mainboard by Queens-Rocket-Engineering-Team, with 3 stars.

Can I simulate one of these boards using the LMR51430XDDCR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part