Stm32 devboard

mantisea12·stm32_devboard

Stm32 devboard

About the Stm32 devboard PCB

Stm32 devboard is an open source ESP32 PCB design by mantisea12, published on GitHub. It is a board, with 83 components from 31 distinct parts.

Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the STM32H7A3AGIxQ, W25Q128JVS, MCP1700x-120xxMB and CH224K. By type, the board carries 53 capacitors, 12 resistors, 9 connectors, 5 ICs, 2 inductors and 1 crystal.

It belongs with the dev boards & breakouts and iot & wireless designs in this gallery.

From the project

An 8-layer HDI STM32H7 development board featuring onboard QSPI flash, a microSD card reader, 20 exposed GPIO pins, Wi-Fi connectivity via an ESP32-WROOM module, and an exposed UART interface.

An 8-layer HDI development board based on the STM32H7A3AG (UFBGA169, 0.5 mm pitch package).

- STM32H7A3AG microcontroller - ESP32 wireless coprocessor - External flash memory - microSD card interface - One UART interface for the STM32H7, and another for the ESP32. - USB connectivity - High-density routing

- PCB Layers: 8 - HDI construction with microvias - Package: UFBGA169 (0.5 mm pitch) - Software: KiCad

Main components on the Stm32 devboard

Stm32 devboard bill of materials (BOM)

83 components, 31 distinct parts.

QtyPartRefs
1
STM32H7A3AGIxQ
U1
1
W25Q128JVS
U2
1
MCP1700x-120xxMB
U3
1
CH224K
U5
1
ESP32-C3-WROOM-02
U6
1
asdmb-25.000mhz-ly-t
Y1
2
Conn_01x12_Pin
J1, J5
1
Conn_01x04_Pin
J2
1
Micro_SD_Card_Det1
J3
1
Conn_01x04_Pin
J4
1
Conn_01x08_Pin
J6
1
Conn_01x02_Pin
J7
1
Conn_01x01_Pin
J8
1
USB_C_Plug_USB2.0
P1
1
LED
D1
1
FerriteBead_Small
FB1
1
2.2u
L1
11
10u
C1, C34, C40, C43, C46, C47, C48, C49 +3
1
100n
C2
1
4.7u
C2_tanatalum1
Show 11 more
QtyPartRefs
31
100n
C3, C4, C5, C6, C7, C8, C9, C10 +23
4
1u
C23, C27, C28, C29
3
2.2u
C24, C25, C26
1
4.7u
C30
1
100p
C33
6
10k
R1, R5, R6, R8, R10, R12
1
10
R2
1
100
R3
1
100k
R4
1
1k
R7
2
22
R9, R11

Stm32 devboard design files

The KiCad project lives in the mantisea12/stm32_devboard repository on GitHub; these links point at the commit this page was built from.

Stm32 devboard: common questions

What microcontroller does the Stm32 devboard use?

The Stm32 devboard is built around the ESP32-C3-WROOM-02, from the ESP32 family.

How many components are on the Stm32 devboard?

83 components, from 31 distinct parts. The full bill of materials is listed on this page.

Where can I download the Stm32 devboard design files?

From the mantisea12/stm32_devboard repository on GitHub, which has the schematic; the links under Design files point to each one.

Can I use the Stm32 devboard design in my own project?

The repository has no license, so all rights stay with mantisea12. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Stm32 devboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards