Orange-Micro-Grappler+-Rev-C
About the Orange-Micro-Grappler+-Rev-C PCB
Orange-Micro-Grappler+-Rev-C is an open source PCB design by markadev, published on GitHub. It is a 2-layer board, with 22 components from 15 distinct parts.
Other key parts include the 74LS00, 74LS279, 74LS02, 74LS74 and 74LS08. By type, the board carries 11 ICs, 8 capacitors, 1 connector, 1 switch and 1 diode.
It belongs with the retro computing designs in this gallery.
From the project
Reverse engineered Apple II products
This repo contains information about various Apple II hardware that I've seen and decided to reverse engineer. For each piece of hardware I try to include as much information as possible so that the hardware could be cloned if necessary.
This repository hosts a github page that can be viewed here: https://markadev.github.io/AppleII-RevEng
Main components on the Orange-Micro-Grappler+-Rev-C
Orange-Micro-Grappler+-Rev-C bill of materials (BOM)
22 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 74LS00 | U1, U4, U6 | |
| 1 | 74LS279 | U2 | |
| 1 | 74LS02 | U3 | |
| 1 | 74LS74 | U5 | |
| 1 | 74LS08 | U7 | |
| 1 | 74LS30 | U8 | |
| 1 | 27C32 | DIP-24_W15.24mm | U9 |
| 1 | 74LS374 | U10 | |
| 1 | 74LS373 | U11 | |
| 1 | Conn_02x13 | J1 | |
| 1 | SW_DIP_x04 | S1 | |
| 1 | 1N4001 | D1 | |
| 3 | 100p | C_Axial_L3.8mm_D2.6mm_P12.50mm_Horizontal | C1, C7, C8 |
| 4 | 0.1µ | C_Axial_L3.8mm_D2.6mm_P12.50mm_Horizontal | C2, C4, C5, C6 |
| 1 | 470p | C_Axial_L3.8mm_D2.6mm_P12.50mm_Horizontal | C3 |
Orange-Micro-Grappler+-Rev-C design files
The KiCad project lives in the markadev/AppleII-RevEng repository on GitHub; these links point at the commit this page was built from.
Orange-Micro-Grappler+-Rev-C: common questions
How big is the Orange-Micro-Grappler+-Rev-C PCB?
The Orange-Micro-Grappler+-Rev-C has 2 copper layers and is 1.6 mm thick.
How many components are on the Orange-Micro-Grappler+-Rev-C?
22 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Orange-Micro-Grappler+-Rev-C design files?
From the markadev/AppleII-RevEng repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Orange-Micro-Grappler+-Rev-C design in my own project?
The repository has no license, so all rights stay with markadev. Use it as a reference, and ask the author before reusing the design.
More boards in AppleII-RevEng
- schematic only · 32 parts
Digicard-D-Net
32 parts2LNo license23 - schematic only · 26 parts
Spies-Labs-NicePrint-Card
26 parts2LNo license23 - schematic only · 23 parts
Orange-Micro-Grappler+
23 parts2LNo license23 - schematic only · 19 parts
Microtek-Dumpling-GX
19 parts2LNo license23 - schematic only · 13 parts
Prometheus-PRT-1
13 parts2LNo license23
Similar boards
OpenTendo
Redherring32
196.3 × 118.7 mm93 parts2LTAPR-OHL-1.0850
MCL86jr
MicroCoreLabs
56.1 × 57.1 mm66 parts4LNo license532
24pin flex interposer
Wren6991
29 × 32 mm3 parts2LNo license508
Sram dev board
50 × 50 mm12 parts2LNo license508
TRS-80 Color Computer 3
baldengineer
280 × 155.3 mm204 parts2LCC-BY-4.0442
Commodore Plus 4
284.7 × 158.9 mm212 parts2LCC-BY-4.0442