60 open source boards using the 74LS374

Real designs built with the 74LS374, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

60 boardsClear filters|Most starred

How designs wire the 74LS374

Read from the KiCad layouts of 45 open source designs, one per repository: what each pin of the 74LS374 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 27 of 45 designs, most often 100 nF (then 47 nF).
GNDpin 10Connected to: GND 100%
VCCpin 20Connected to: 5V 96%
  • Decoupling capacitor on 60% · 100 nF (23), 47 nF (2), 2.2 µF (2)

18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Snark barker by schlae, TRS-80 Color Computer 3 by baldengineer, RC6502 Joystick by tebl and CGA Redux by hkzlab.

The 74LS374 in open source designs

The gallery holds 60 open source boards using the 74LS374 from 48 GitHub repositories; a typical one measures about 129.5 × 100 mm and carries around 51 components.

88% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.

The most starred is Snark barker by schlae.

Microcontrollers on boards using the 74LS374

74LS374: common questions

Where can I find a 74LS374 reference design?

Each of the 60 boards on this page is a real design using the 74LS374. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74LS374 VCC pin?

The VCC pin has a decoupling capacitor on 27 of 45 designs, most often 100 nF (then 47 nF). Counted from the KiCad layouts of 45 open source designs using the 74LS374.

What parts are used alongside the 74LS374?

The 74LS138, 74LS245, 74LS244, 74LS32 and 74LS08 appear in the most repositories here.

Which microcontrollers do boards using the 74LS374 use?

Most are built on AVR/Arduino (5).

How big is a typical board using the 74LS374?

The median is 129.5 × 100 mm, and 88% are two-layer designs.

What is the most popular open source board using the 74LS374?

By GitHub stars, Snark barker by schlae, with 687 stars.

Can I simulate one of these boards using the 74LS374 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part