HardLabs

Spies-Labs-NicePrint-Card

markadev·AppleII-RevEng·Spies-Labs-NicePrint-Card/Spies-Labs-NicePrint-Card/Spies-Labs-NicePrint-Card.kicad_pcb

This repository ships a schematic but no board layout.

About the Spies-Labs-NicePrint-Card PCB

Spies-Labs-NicePrint-Card is an open source PCB design by markadev, published on GitHub. It is a 2-layer board, with 26 components from 15 distinct parts.

Other key parts include the 74LS374, 74LS279, 27C64, 74LS00 and 74LS138. By type, the board carries 13 ICs, 6 resistors, 5 capacitors, 1 connector and 1 switch.

It belongs with the retro computing designs in this gallery.

From the project

Reverse engineered Apple II products

This repo contains information about various Apple II hardware that I've seen and decided to reverse engineer. For each piece of hardware I try to include as much information as possible so that the hardware could be cloned if necessary.

This repository hosts a github page that can be viewed here: https://markadev.github.io/AppleII-RevEng

Main components on the Spies-Labs-NicePrint-Card

74LS37474LS27927C6474LS0074LS138211474LS0274LS17474LS30

Spies-Labs-NicePrint-Card bill of materials (BOM)

26 components, 15 distinct parts.

QtyPartRefs
2
74LS374
U1, U2
1
74LS279
U3
3
27C64
U4, U5, U7
1
74LS00
U6
2
74LS138
U8, U13
1
2114
U9
1
74LS02
U10
1
74LS174
U11
1
74LS30
U12
1
Conn_02x13
J1
1
SW_DIP_x04
SW1
4
0.1µ
C1, C2, C3, C4
1
15p
C5
5
3.3k
R1, R3, R4, R5, R6
1
2k
R2

Spies-Labs-NicePrint-Card design files

The KiCad project lives in the markadev/AppleII-RevEng repository on GitHub; these links point at the commit this page was built from.

Spies-Labs-NicePrint-Card: common questions

How big is the Spies-Labs-NicePrint-Card PCB?

The Spies-Labs-NicePrint-Card has 2 copper layers and is 1.6 mm thick.

How many components are on the Spies-Labs-NicePrint-Card?

26 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the Spies-Labs-NicePrint-Card design files?

From the markadev/AppleII-RevEng repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Spies-Labs-NicePrint-Card design in my own project?

The repository has no license, so all rights stay with markadev. Use it as a reference, and ask the author before reusing the design.

More boards in AppleII-RevEng

Similar boards