HardLabs

Prometheus-PRT-1

markadev·AppleII-RevEng·Prometheus-PRT-1/Prometheus-PRT-1/Prometheus-PRT-1.kicad_pcb

This repository ships a schematic but no board layout.

About the Prometheus-PRT-1 PCB

Prometheus-PRT-1 is an open source PCB design by markadev, published on GitHub. It is a 2-layer board, with 13 components from 9 distinct parts.

Other key parts include the 74LS74, 74LS00, 74LS374, 74LS30 and 74LS08. By type, the board carries 9 ICs, 2 capacitors, 1 connector and 1 resistor.

It belongs with the retro computing designs in this gallery.

From the project

Reverse engineered Apple II products

This repo contains information about various Apple II hardware that I've seen and decided to reverse engineer. For each piece of hardware I try to include as much information as possible so that the hardware could be cloned if necessary.

This repository hosts a github page that can be viewed here: https://markadev.github.io/AppleII-RevEng

Main components on the Prometheus-PRT-1

74LS7474LS0074LS37474LS3074LS08MM27C16Q-1

Prometheus-PRT-1 bill of materials (BOM)

13 components, 9 distinct parts.

QtyPartRefs
2
74LS74
U1, U2
2
74LS00
U3, U9
1
74LS374
U4
1
74LS30
U5
2
74LS08
U6, U8
1
MM27C16Q-1
U7
1
Conn_02x10
J1
2
0.1µ
C1, C2
1
5.5k
R1

Prometheus-PRT-1 design files

The KiCad project lives in the markadev/AppleII-RevEng repository on GitHub; these links point at the commit this page was built from.

Prometheus-PRT-1: common questions

How big is the Prometheus-PRT-1 PCB?

The Prometheus-PRT-1 has 2 copper layers and is 1.6 mm thick.

How many components are on the Prometheus-PRT-1?

13 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Prometheus-PRT-1 design files?

From the markadev/AppleII-RevEng repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Prometheus-PRT-1 design in my own project?

The repository has no license, so all rights stay with markadev. Use it as a reference, and ask the author before reusing the design.

More boards in AppleII-RevEng

Similar boards