HardLabs

S3-27-epaper touch

martinberlin·bistable-smart-switch·Hardware/S3-27-epaper-touch-pro/S3-27-epaper-touch.kicad_pcb

S3-27-epaper touch PCB layout, top view — open source ESP32 board by martinberlin

About the S3-27-epaper touch PCB

S3-27-epaper touch is an open source ESP32 PCB design by martinberlin, published on GitHub under the Apache-2.0 license. It is a 4-layer board measuring 65.4 × 71 mm, with 51 components from 32 distinct parts.

Its main chip is the ESP32-S3, from the ESP32 family. Other key parts include the CP2102N-A02-GQFN28R, C39051 and C107410. By type, the board carries 17 capacitors, 15 resistors, 6 connectors, 4 ICs, 3 transistors and 3 diodes.

It belongs with the displays & leds and iot & wireless designs in this gallery.

From the project

An epaper switch project with 2 PCBs, controller+touch, and 220AC to 3DC with Relay (Latch or solid-state)

IMPORTANT: This repository contains components added as github submodules. Please clone it using

git clone --recurse-submodules https://github.com/martinberlin/bistable-smart-switch.git or if you already cloned it without them just run additionally: git submodule update --init --recursive

This is a project that started with the idea to use small, and inexpensive, SPI epapers with touch. The ones that I've found available and met that criteria are produced by Good-Display in Dalian. The idea is very simple:

S3-27-epaper touch, from the project README
From the project README

Main components on the S3-27-epaper touch

ESP32-S3CP2102N-A02-GQFN28RC39051C107410

S3-27-epaper touch bill of materials (BOM)

51 components, 32 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3
U1
1
CP2102N-A02-GQFN28R
U2
1
C39051
MCP1700-3302E_SOT23
U3
1
C107410
DS3231MZ
U4
1
C469327
Si1308
Q1
2
C146798
BC817
Q2, Q3
1
C262292
AFC24-S24FIC-00
J1
1
C165948
USB_C_Programming
J2
2
Conn_01x06
J3, J6
1
C224194
Conn_01x06_Female
J4
1
GROVE
J5
1
CR1220
BT1
1
C2911519
RESE
JP1
3
C77336
MBR0530
D1, D2, D3
1
C38117
10uH
L1
7
C1779
4.7uF
C1, C2, C3, C7, C9, C10, C19
4
C28323
1uF
C4, C5, C6, C8
1
C1779
4.7uF 50V
C11
1
C19666
4.7uF
C12
1
C28233
100nF
C13
Show 12 more
QtyPartRefs
2
C15850
10uF
C14, C15
1
C129289
C_Polarized 100uF
C16
1
C25804
10K
R1
4
C25804
10 K
R2, R4, R5, R12
1
C25237
3R
R3
2
C23186
5.1K
R6, R7
2
C23162
4.7K
R8, R9
1
C22980
4.7K
R10
1
C103895
0.47R
R11
1
C21190
1K
R13
1
C31850
22K
R14
1
C137974
47.5K
R15

S3-27-epaper touch design files

The KiCad project lives in the martinberlin/bistable-smart-switch repository on GitHub; these links point at the commit this page was built from.

S3-27-epaper touch: common questions

What microcontroller does the S3-27-epaper touch use?

The S3-27-epaper touch is built around the ESP32-S3, from the ESP32 family.

How big is the S3-27-epaper touch PCB?

The S3-27-epaper touch measures 65.4 × 71 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the S3-27-epaper touch?

51 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the S3-27-epaper touch design files?

From the martinberlin/bistable-smart-switch repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the S3-27-epaper touch design in my own project?

Yes, under the terms of its Apache-2.0 license, which martinberlin chose for the repository.

Can I test firmware for the S3-27-epaper touch without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in bistable-smart-switch

Similar boards