2 open source boards using the C107410
Real designs built with the C107410, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Cinread-IT8951 S3 HAT
martinberlin
83.2 × 42.1 mm54 parts2LCERN-OHL-W-2.012
STM32Dalws
anhldptit2610
64 × 43 mm72 parts4LMIT2
The C107410 in open source designs
The gallery holds 2 open source boards using the C107410 from 2 GitHub repositories; a typical one measures about 73.6 × 42.5 mm and carries around 63 components.
50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Cinread-IT8951 S3 HAT by martinberlin.
What boards using the C107410 are built for
C107410: common questions
Where can I find a C107410 reference design?
Each of the 2 boards on this page is a real design using the C107410. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the C107410 use?
Most are built on ESP32 (1) and STM32 (1).
How big is a typical board using the C107410?
The median is 73.6 × 42.5 mm, and 50% are two-layer designs.
What is the most popular open source board using the C107410?
By GitHub stars, Cinread-IT8951 S3 HAT by martinberlin, with 12 stars.
Can I simulate one of these boards using the C107410 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.