13 open source boards using the C39051
Real designs built with the C39051, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
C3 epaper controller w/touch
martinberlin
70.2 × 71 mm58 parts4LApache-2.032ESP32
Cinread-IT8951 S3 HAT
martinberlin
83.2 × 42.1 mm54 parts2LCERN-OHL-W-2.012RP2040/RP2350
DevBoard-202
ThongNQ867
30 × 51 mm38 parts2LNo license1RP2040/RP2350
Waterboard
invicta952-dotcom
9.4 × 9.4 mm72 parts2LNo license0RP2040/RP2350
PicoCAN
AdrianR3
21 × 51.5 mm51 parts2LNo license0Nordic nRF
BluBoard
cubit010
25.8 × 51.2 mm51 parts6LNo license0RP2040/RP2350
PicoFlip-X
mavory
21 × 51 mm50 parts2LNo license0RP2040/RP2350
Cuttingboard
rudranshgoel1
21 × 51 mm39 parts2LNo license0RP2040/RP2350
Rp2040-usbc dev board
mattkanwisher
21 × 51 mm35 parts2LNo license0RP2040/RP2350
KBoardV1
KaushikDuddala
21 × 51 mm33 parts2LNo license0ESP32
S3-27-epaper touch
martinberlin
65.4 × 71 mm51 parts4LApache-2.032ESP32
C3-27-epaper touch
martinberlin
65.4 × 71 mm46 parts2LCERN-OHL-W-2.023ESP32
Sharp lcd-128x128
martinberlin
50.3 × 33 mm37 parts2LCERN-OHL-W-2.023
How designs wire the C39051
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the C39051 connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a decoupling capacitor on 10 of 11 designs, most often 10 µF (then 100 nF).
- The VO pin has a decoupling capacitor on 9 of 11 designs, most often 10 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 91% | — |
| VOpin 2 | Connected to: 3.3V 91% |
|
| VIpin 3 | Connected to: VBUS 82% · a signal 18% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include C3 epaper controller w/touch by martinberlin, C3-27-epaper touch by martinberlin, Cinread-IT8951 S3 HAT by martinberlin and DevBoard-202 by ThongNQ867.
The C39051 in open source designs
The gallery holds 13 open source boards using the C39051 from 11 GitHub repositories; a typical one measures about 25.8 × 51 mm and carries around 50 components.
77% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.
The most starred is C3 epaper controller w/touch by martinberlin.
Parts used alongside the C39051
Microcontrollers on boards using the C39051
What boards using the C39051 are built for
C39051: common questions
Where can I find a C39051 reference design?
Each of the 13 boards on this page is a real design using the C39051. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the C39051 VI pin?
The VI pin has a decoupling capacitor on 10 of 11 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 11 open source designs using the C39051.
What decoupling capacitors do designs use on the C39051 VO pin?
The VO pin has a decoupling capacitor on 9 of 11 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 11 open source designs using the C39051.
What parts are used alongside the C39051?
The C2040, C2843335, C107410, C2934560 and C969151 appear in the most repositories here.
Which microcontrollers do boards using the C39051 use?
Most are built on RP2040/RP2350 (7), ESP32 (5) and Nordic nRF (1).
How big is a typical board using the C39051?
The median is 25.8 × 51 mm, and 77% are two-layer designs.
What is the most popular open source board using the C39051?
By GitHub stars, C3 epaper controller w/touch by martinberlin, with 32 stars.
Can I simulate one of these boards using the C39051 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.