Wordclock
matty337s·Wordclock·Hardware/Wordclock.kicad_pcb
About the Wordclock PCB
Wordclock is an open source ESP32 PCB design by matty337s, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 212.4 × 152.2 mm, with 73 components from 31 distinct parts.
Its main chip is the ESP32-WROOM-32D, from the ESP32 family. Other key parts include the CH340C, PCF8563T, SN74LVC1T45 and AZ1117CH-3.3TRG1. By type, the board carries 23 capacitors, 18 diodes, 15 resistors, 5 ICs, 3 transistors and 3 connectors.
It belongs with the iot & wireless and displays & leds designs in this gallery.
From the project
Electronic clock that tells the time using words. ESP32 based.
Initially based on the Wordclock by t0mg, this project is designed to intergrate with the firmware from their project with slight modification. Check it out if you haven't already.
The PCB panel and BOM contain all of the electronics to complete the clock. No LED strips or wiring required. 114 LEDs display the time to the minute using words for a unique, modern and functional clock.

Main components on the Wordclock
Wordclock bill of materials (BOM)
73 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH340C | SOIC-16_3.9x9.9mm_P1.27mm | U101 |
| 1 | PCF8563T | SOIC-8_3.9x4.9mm_P1.27mm | U102 |
| 1 | ESP32-WROOM-32D | ESP32-WROOM-32 | U103 |
| 1 | SN74LVC1T45 | SOT-363_SC-70-6 | U104 |
| 1 | AZ1117CH-3.3TRG1 AMS1117-3.3 Diodes Incorporated | SOT-223-3_TabPin2 | U105 |
| 2 | C20526 Q_NPN_BEC | SOT-23 | Q101, Q102 |
| 1 | PhotoTransistor | LED_D3.0mm | Q103 |
| 1 | Crystal | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y101 |
| 1 | USB_C_RECEPTACLE_USB2.0 USB_C_Receptacle | USB_C_Receptacle_Palconn_UTC16-G | J101 |
| 1 | PROGRAMMING | PinHeader_1x07_P2.54mm_Vertical | J102 |
| 1 | LED_STRIP | PCB_TO_PCB_SOLDER_CONNECTOR | J103 |
| 1 | SolderJumper_2_Bridged | SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP101 |
| 1 | C318884 HOUR | SW_SPST_TL3342 | SW101 |
| 1 | C318884 MIN | SW_SPST_TL3342 | SW102 |
| 1 | C318884 AM/PM | SW_SPST_TL3342 | SW103 |
| 1 | VAL** | mouse-bite-2mm-slot_center | mouse-bite-2mm-slot |
| 2 | C14996 D_Schottky | D_SMA | D101, D102 |
| 1 | LG R971-KN-1 GREEN LED OSRAM Opto Semiconductors Inc. | LED_0805_2012Metric | D103 |
| 15 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D201, D202, D203, D204, D301, D302, D303, D304 +7 |
| 4 | 100NF 100nF | C_0603_1608Metric | C101, C103, C104, C105 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 70MF 70mF | SM3R3703T01U | C102 |
| 2 | 22UF 22uF | C_1206_3216Metric | C106, C108 |
| 1 | 10UF 10uF | C_0805_2012Metric | C107 |
| 15 | 100nF | C_0603_1608Metric | C201, C202, C203, C204, C301, C302, C303, C304 +7 |
| 2 | 5K1 5k1 | R_0603_1608Metric | R101, R102 |
| 5 | 10K 10k | R_0603_1608Metric | R103, R105, R107, R112, R114 |
| 1 | 100 | R_0805_2012Metric | R104 |
| 3 | 470R | R_0603_1608Metric | R106, R111, R113 |
| 2 | 47R | R_0603_1608Metric | R108, R115 |
| 1 | 4.7K 4.7k | R_0603_1608Metric | R109 |
| 1 | 1K5 1k5 | R_0805_2012Metric | R110 |
Wordclock design files
The KiCad project lives in the matty337s/Wordclock repository on GitHub; these links point at the commit this page was built from.
Wordclock: common questions
What microcontroller does the Wordclock use?
The Wordclock is built around the ESP32-WROOM-32D, from the ESP32 family.
How big is the Wordclock PCB?
The Wordclock measures 212.4 × 152.2 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Wordclock?
73 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Wordclock design files?
From the matty337s/Wordclock repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Wordclock design in my own project?
Yes, under the terms of its GPL-3.0 license, which matty337s chose for the repository.
Can I test firmware for the Wordclock without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k