4 open source boards using the SN74LVC1T45

Real designs built with the SN74LVC1T45, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The SN74LVC1T45 in open source designs

The gallery holds 4 open source boards using the SN74LVC1T45 from 4 GitHub repositories; a typical one measures about 90.4 × 72.5 mm and carries around 77 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Butterstick hardware by butterstick-fpga.

Microcontrollers on boards using the SN74LVC1T45

SN74LVC1T45: common questions

Where can I find a SN74LVC1T45 reference design?

Each of the 4 boards on this page is a real design using the SN74LVC1T45. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the SN74LVC1T45 use?

Most are built on AVR/Arduino (1), ESP32 (1) and FPGA (1).

How big is a typical board using the SN74LVC1T45?

The median is 90.4 × 72.5 mm, and 50% are two-layer designs.

What is the most popular open source board using the SN74LVC1T45?

By GitHub stars, Butterstick hardware by butterstick-fpga, with 221 stars.

Can I simulate one of these boards using the SN74LVC1T45 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part