ZoneTherm
Max-Brants·ZoneTherm·pcb/ZoneTherm.kicad_pcb
About the ZoneTherm PCB
ZoneTherm is an open source ESP32 PCB design by Max-Brants, published on GitHub under the MIT license. It is a 4-layer board measuring 234.5 × 81 mm, with 231 components from 65 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the CH340C, MCP23017_SO, W5500 and TPS5430DDA. By type, the board carries 98 resistors, 47 transistors, 26 connectors, 26 capacitors, 23 diodes and 5 ICs.
It belongs with the iot & wireless and sensors designs in this gallery.
From the project
A 7-zone OpenTherm heating/cooling controller. ESP32-S3 firmware, KiCad hardware, and a Svelte web UI for a house where every room has its own OpenTherm room thermostat but the plant has a single manifold of zone valves.
A 7-zone OpenTherm heating/cooling controller. ESP32-S3 firmware, KiCad hardware, and a Svelte web UI for a house where every room has its own OpenTherm room thermostat but the plant has a single manifold of zone valves.
A normal OpenTherm setup is one thermostat talking to one boiler. ZoneTherm sits in the middle of seven of those conversations at once:
To each thermostat, ZoneTherm pretends to be a boiler. It answers every OpenTherm request the thermostat makes, so the thermostat behaves exactly as it would on a real appliance — it shows a flame, it runs its own schedule, it lets you turn…
Main components on the ZoneTherm
ZoneTherm bill of materials (BOM)
231 components, 65 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH340C | SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | MCP23017_SO | SOIC-28W_7.5x17.9mm_P1.27mm | U2 |
| 1 | W5500 | LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U4 |
| 1 | TPS5430DDA | TI_SO-PowerPAD-8 | U6 |
| 22 | BC858B | SOT-23 | Q1, Q2, Q3, Q6, Q7, Q8, Q11, Q12 +14 |
| 23 | BC848C | SOT-23 | Q4, Q5, Q9, Q10, Q14, Q15, Q19, Q20 +15 |
| 2 | PC817XNNIP1B | SOP254P960X420-4N | Q44, Q45 |
| 1 | 25MH | Crystal_SMD_TXC_7M-4Pin_3.2x2.5mm | Y1 |
| 8 | CONN_01X02 Conn_01x02 | PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | J1, J2, J3, J4, J5, J6, J8, J24 |
| 1 | CONN_01X03 Conn_01x03 | PhoenixContact_MSTBA_2,5_3-G-5,08_1x03_P5.08mm_Horizontal | J7 |
| 1 | RJ45_HANRUN_HR911105A_HORIZONTAL RJ45_Hanrun_HR911105A_Horizontal | RJ45_Hanrun_HR911105A_Horizontal | J9 |
| 1 | CONN_01X06 Conn_01x06 | PhoenixContact_MSTBA_2,5_6-G-5,08_1x06_P5.08mm_Horizontal | J10 |
| 5 | CONN_01X04 Conn_01x04 | PhoenixContact_MSTBA_2,5_4-G-5,08_1x04_P5.08mm_Horizontal | J11, J12, J13, J14, J15 |
| 1 | CONN_01X08 Conn_01x08 | PhoenixContact_MSTBA_2,5_8-G-5,08_1x08_P5.08mm_Horizontal | J16 |
| 1 | Screw_Terminal | Altech_AK100_1x04_P5.00mm | J17 |
| 1 | C2765186 USB_C_Receptacle | USB_C_Receptacle_Palconn_UTC16-G | J18 |
| 7 | G5NB-1A-E-24VDC OMRON(欧姆龙) | RELAY-TH_G5NB-1A-E-24VDC | J19, J20, J21, J22, J23, J25, J26 |
| 1 | Fuse | Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | C720477 Boot | SW-SMD_L3.9-W3.0-P4.45 | SW1 |
Show 45 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C720477 Reset | SW-SMD_L3.9-W3.0-P4.45 | SW2 |
| 8 | LED | LED_0805_2012Metric | D1, D2, D3, D4, D5, D6, D7, D14 |
| 11 | 1N4148WS | D_SOD-323 | D8, D9, D10, D15, D16, D17, D18, D19 +3 |
| 1 | 4V7 | D_SOD-323_HandSoldering | D11 |
| 1 | 4V3 | D_SOD-323_HandSoldering | D12 |
| 1 | 13V | D_SOD-323_HandSoldering | D13 |
| 1 | MRBS340 | D_SMC | D32 |
| 1 | 15UH/3A 15uh/3A | L_Changjiang_FXL0630 | L2 |
| 1 | BLM18PG121SN1D | L_0603_1608Metric | L3 |
| 7 | 0.1UF 0.1uf | C_0402_1005Metric | C1, C10, C18, C19, C20, C21, C22 |
| 1 | 22UF 22uf | C_0603_1608Metric | C2 |
| 1 | 330 uf | CP_Elec_8x10.5 | C3 |
| 1 | 1UF 1uf | C_0603_1608Metric | C5 |
| 1 | 0.1UF 0.1uf | C_0603_1608Metric | C6 |
| 2 | 6.8NF 6.8nF | C_0402_1005Metric | C7, C14 |
| 1 | 0.01UF 0.01uf | C_0402_1005Metric | C8 |
| 1 | 4.7UF 4.7uf | C_1206_3216Metric | C9 |
| 1 | 150PF 150pf | C_0603_1608Metric | C11 |
| 1 | 1500PF 1500pf | C_0603_1608Metric | C12 |
| 1 | 100UF 100uf | C_1206_3216Metric | C13 |
| 3 | 10NF 10nf | C_0402_1005Metric | C15, C17, C24 |
| 1 | 22NF 22nf | C_0402_1005Metric | C16 |
| 1 | 10UF/16V 10uf/16v | CP_EIA-3216-18_Kemet-A | C23 |
| 1 | 4.7UF 4.7uf | C_0402_1005Metric | C25 |
| 2 | 18PF 18pf | C_0402_1005Metric | C26, C27 |
| 7 | 33K 33k | R_0603_1608Metric | R1, R9, R16, R25, R33, R41, R68 |
| 8 | 100 | R_0603_1608Metric | R2, R10, R17, R26, R34, R42, R54, R69 |
| 7 | 33 | R_0603_1608Metric | R3, R11, R18, R27, R35, R43, R70 |
| 7 | 20K 20k | R_0603_1608Metric | R4, R12, R19, R28, R36, R44, R71 |
| 20 | 10K | R_0603_1608Metric | R5, R13, R20, R29, R37, R45, R50, R58 +12 |
| 15 | 1k | R_0603_1608Metric | R6, R14, R21, R30, R38, R46, R49, R51 +7 |
| 9 | 4K7 4k7 | R_0603_1608Metric | R7, R15, R22, R31, R39, R47, R74, R83 +1 |
| 7 | 51 | R_0603_1608Metric | R8, R23, R24, R32, R40, R48, R75 |
| 2 | 330 | R_0603_1608Metric | R52, R85 |
| 1 | 220 | R_0603_1608Metric | R53 |
| 1 | 1.5K 1.5k | R_0603_1608Metric | R55 |
| 2 | 5.1K | R_0402_1005Metric | R86, R87 |
| 1 | 549 | R_0603_1608Metric | R88 |
| 1 | 3.9K | R_0603_1608Metric | R89 |
| 1 | 2K | R_0603_1608Metric | R96 |
| 4 | 49R9 | R_0402_1005Metric | R118, R119, R120, R121 |
| 1 | 10R | R_0402_1005Metric | R122 |
| 2 | 330 | R_0402_1005Metric | R123, R124 |
| 1 | 12.4K | R_0402_1005Metric | R125 |
| 1 | 1M | R_0402_1005Metric | R126 |
ZoneTherm design files
The KiCad project lives in the Max-Brants/ZoneTherm repository on GitHub; these links point at the commit this page was built from.
ZoneTherm: common questions
What microcontroller does the ZoneTherm use?
The ZoneTherm is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the ZoneTherm PCB?
The ZoneTherm measures 234.5 × 81 mm, has 4 copper layers and is 1.599985 mm thick.
How many components are on the ZoneTherm?
231 components, from 65 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ZoneTherm design files?
From the Max-Brants/ZoneTherm repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ZoneTherm design in my own project?
Yes, under the terms of its MIT license, which Max-Brants chose for the repository.
Can I test firmware for the ZoneTherm without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k