HardLabs

EEE3088F-MicroMouse-Power-Board-Group-21

MikeLight11·EEE3088F-MicroMouse-Power-Board-Group-21·Final Schematic and PCB/powerSubsys full final.kicad_pcb

EEE3088F-MicroMouse-Power-Board-Group-21 layout, top view — open source board by MikeLight11

About the EEE3088F-MicroMouse-Power-Board-Group-21

EEE3088F-MicroMouse-Power-Board-Group-21 is an open source PCB design by MikeLight11, published on GitHub. It is a 2-layer board measuring 80 × 60 mm, with 78 components from 33 distinct parts.

Other key parts include the INA219AIDR, DRV8833PWR, BQ24074RGT, TPS22810DRVR and CH224K. By type, the board carries 33 resistors, 26 capacitors, 10 ICs, 3 diodes, 2 inductors and 1 transistor.

It belongs with the power & battery and robotics & motion designs in this gallery.

From the project

EEE3088F MicroMouse Power Subsystem PCB Design

Our power subsystem is designed to meet the following key requirements: - Power and control 4 motors bidirectionally - Provide battery monitoring via INA219 on I2C bus - Charge the battery from 9V input with dual charging modes - Integrate USB-C with 9V output - Provide external load switching capabilities - Deliver regulated 3.3V and 5V outputs - Include ON/OFF switch with ultra-low power standby mode

EEE3088F-MicroMouse-Power-Board-Group-21, from the project README
From the project README

Main components on the EEE3088F-MicroMouse-Power-Board-Group-21

INA219AIDRDRV8833PWRBQ24074RGTTPS22810DRVRCH224KL78L33ACUTRTPS63020DSJR

EEE3088F-MicroMouse-Power-Board-Group-21 bill of materials (BOM)

78 components, 33 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
INA219AIDR
U1
2
DRV8833PWR
U2, U7
1
BQ24074RGT
U3
2
TPS22810DRVR
U4, U5
1
CH224K
U6
1
L78L33ACUTR
U8
2
TPS63020DSJR
U9, U10
1
C6749
S9013 J3(RANGE:200-350)
Q2
1
JP RITERM
JP1
1
SS-12D11G3R
SW1
1
TYPE-C-31-M-05
USBC1
3
KT-0805G
D1, D2, D3
1
1.5UH
1.5uH
L1
1
1UH
1uH
L2
6
100NF
100nF
C1, C15, C18, C22, C23, C25
6
1UF
1uF
C2, C3, C4, C6, C8, C24
4
10NF
10nF
C5, C7, C11, C12
2
2.2UF
2.2uF
C9, C14
6
10UF
10uF
C10, C13, C16, C19, C21, C26
2
22UF
22uF
C17, C20
Show 13 more
QtyPartRefs
3
1k
R1, R11, R18
2
3K3
R2, R4
1
0.5M
0.5m
R3
1
1.2K
1.2k
R5
5
10K
10k
R7, R10, R12, R13, R33
3
2.2K
2.2k
R8, R9, R29
2
100K
100k
R14, R31
2
5.1K
5.1k
R15, R16
2
51K
51k
R19, R21
1
1
R20
5
2
R22, R23, R24, R28, R32
4
1M
R25, R27, R34, R35
2
82K
82k
R26, R30

EEE3088F-MicroMouse-Power-Board-Group-21 design files

The KiCad project lives in the MikeLight11/EEE3088F-MicroMouse-Power-Board-Group-21 repository on GitHub; these links point at the commit this page was built from.

EEE3088F-MicroMouse-Power-Board-Group-21: common questions

How big is the EEE3088F-MicroMouse-Power-Board-Group-21?

The EEE3088F-MicroMouse-Power-Board-Group-21 measures 80 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the EEE3088F-MicroMouse-Power-Board-Group-21?

78 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the EEE3088F-MicroMouse-Power-Board-Group-21 design files?

From the MikeLight11/EEE3088F-MicroMouse-Power-Board-Group-21 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the EEE3088F-MicroMouse-Power-Board-Group-21 design in my own project?

The repository has no license, so all rights stay with MikeLight11. Use it as a reference, and ask the author before reusing the design.

Similar boards