Esp32-drone flight controller

mohammedtalha15·esp32-drone-flight-controller

Esp32-drone flight controller PCB layout, top view — open source ESP32 board by mohammedtalha15

About the Esp32-drone flight controller PCB

Esp32-drone flight controller is an open source ESP32 PCB design by mohammedtalha15, published on GitHub. It is a 2-layer board measuring 54 × 34 mm, with 35 components from 22 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the TPS82130, USBLC6-2P6, MPU-6050 and TLV76133DCY. By type, the board carries 12 capacitors, 10 resistors, 5 ICs, 3 connectors, 3 diodes and 2 switches.

It belongs with the robotics & motion, iot & wireless and power & battery designs in this gallery.

From the project

It's a custom ESP32 devboard. It was designed to be a drone flight controller, but it's suitable for other projects as well. I wanted to make this because I thought it was a good idea to try to design a drone with custom electronics. Turns out, electronics are hard, so I just mad

It's a custom ESP32 devboard. It was designed to be a drone flight controller, but it's suitable for other projects as well. I wanted to make this because I thought it was a good idea to try to design a drone with custom electronics. Turns out, electronics are hard, so I just made this. It'll go on the drone when all the other parts are done. This project is being made for and funded by Hack Club's Highway program.

Esp32-drone flight controller, from the project README
From the project README

Main components on the Esp32-drone flight controller

Esp32-drone flight controller bill of materials (BOM)

35 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1
U1
1
TPS82130
U2
1
USBLC6-2P6
U3
1
MPU-6050
U4
1
TLV76133DCY
U5
1
USB_C_RECEPTACLE_USB2.0_14P
USB_C_Receptacle_USB2.0_14P
J1
2
CONN_01X16
Conn_01x16
J2, J3
2
SW_Push
SW1, SW3
1
LED
D1
2
D_Schottky
D2, D3
4
10UF
10uf
C1, C4, C6, C8
4
0U1F
0u1f
C2, C3, C5, C10
1
1UF
1uf
C7
1
3.3NF
3.3nf
C9
1
10NF
10nf
C11
1
22UF
22uf
C12
2
5K1
5k1
R1, R2
1
5.1K
5.1k
R3
2
10K
10k
R4, R5
2
100K
100k
R6, R9
Show 2 more
QtyPartRefs
2
4.7K
4.7k
R7, R8
1
523K
523k
R10

Esp32-drone flight controller design files

The KiCad project lives in the mohammedtalha15/esp32-drone-flight-controller repository on GitHub; these links point at the commit this page was built from.

Esp32-drone flight controller: common questions

What microcontroller does the Esp32-drone flight controller use?

The Esp32-drone flight controller is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Esp32-drone flight controller PCB?

The Esp32-drone flight controller measures 54 × 34 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Esp32-drone flight controller?

35 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Esp32-drone flight controller design files?

From the mohammedtalha15/esp32-drone-flight-controller repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Esp32-drone flight controller design in my own project?

The repository has no license, so all rights stay with mohammedtalha15. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Esp32-drone flight controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards